Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

GS Data Link LEDs Blinks Green?

Discussion in 'DJI Ground Station' started by richparry, Sep 30, 2014.

  1. richparry

    Joined:
    Nov 24, 2013
    Messages:
    125
    Likes Received:
    2
    Location:
    San Diego, CA
    I can't maintain a reliable data link connection with the Phantom using PC GS. I need confirmation on what the data link module LEDs should look like. Is the Bluetooth data link manual correct when it says on page 3 that the TX/RX LED should blink GREEN and never be RED?

    My TX/RX LED blinks RED but every 2-3 seconds it blinks GREEN for a fraction of a second and then returns to blinking RED.

    Can someone please confirm that the LINK LED should be SOLID Green and the TX/RX LED should blink Green and I should never see RED.

    Thanks,
     

    Attached Files:

  2. Suwaneeguy

    Joined:
    Feb 19, 2014
    Messages:
    701
    Likes Received:
    22
    Blinking green lights on the ground and air ends means they are talking to each other just fine.
    On the BT module, the green light should be solid. If it is red, you need to install the firmware.
    As long as the bird is powered up.
     
  3. richparry

    Joined:
    Nov 24, 2013
    Messages:
    125
    Likes Received:
    2
    Location:
    San Diego, CA
    Thank you for reply and the explanation. I should have read the manual, sorry.