Gimble Overload P3

Joined
Feb 19, 2017
Messages
2
Reaction score
0
Age
51
After a small crash (5 feet or so) with my P3 standard, I now have a gimble overload on DJI app. The camera gimble shakes from side to side while the camera moves around irratically. I have searched Yiutube and tried a couple things with no avail. Any help or advice would be appreciated
 
I think your ribbon cable got disconnected when you crashed. My buddy crashed his mavoc and had the same issue. He sent it off to dji and they sent him a new one for 130$ he did not have dji care.


Sent from my iPhone using PhantomPilots
 
Or the yaw arm shifted on the motor shaft. Grub set screw on arm should sit square on the flat side of the motor shaft.
Real easy fix with 1.5mm hex driver if this is the issue.
Other motors may have skewed from their correct orientation.

Sent from my HTC 10 using PhantomPilots mobile app
 
Thank you all. I did check the set screw and the other motors. No luck. I'm going to go down the ribbon path and replace it since I'll have apart checking on it. Thanks again.


Sent from my iPhone using PhantomPilots
 

Members online

No members online now.

Forum statistics

Threads
143,054
Messages
1,467,297
Members
104,919
Latest member
BobDan