- Joined
- Dec 25, 2016
- Messages
- 3
- Reaction score
- 0
- Age
- 34
I crashed and replaced the yaw arm on the gimbal, but now there's a cyclic buzzing noise on the gimbal that vibrates the camera. It buzzes approximately every 1 second, which correlates with the shaking seen in the recorded video. Occasionally, there's no noise, but for the most part, there's always a constant buzzing noise.
The phantom is running firmware version 1.7.90.
Here's what I've attempted so far:
I've heard that ND filters with various shutter speeds help to smooth out the shaking, but I'd like to find a permanent solution to fix the gimbal itself, instead of trying to cover up the problem.
Any help is appreciated, thanks.
EDIT: I've also replaced all of the props with brand new ones
The phantom is running firmware version 1.7.90.
Here's what I've attempted so far:
- Tightened setscrew on the yaw gimbal arm
- Calibrated IMU on a level surface
- Auto calibrated gimbal
I've heard that ND filters with various shutter speeds help to smooth out the shaking, but I'd like to find a permanent solution to fix the gimbal itself, instead of trying to cover up the problem.
Any help is appreciated, thanks.
EDIT: I've also replaced all of the props with brand new ones
Last edited: