Oso
Premium Pilot
Posts 3 and 4 in this same thread. He tried 1.4.1 after first going from 1.3.2 directly to 1.5.3. It didn't work either.
Dome, how did you know that the failed modules were TI DSP and TX Fpga?
Last edited:
First no video downlink, now P3P fails repeated update attempts. Help!
- Thread starter Kevin H.
- Start date
Dome, how did you know that the failed modules were TI DSP and TX Fpga?
Sorry I missed the posts ...!
The LOG file contains sections numbers and each section number refer to a cpu/mcu inside P3 circuitry. Some are known other not.
Code:
[00015365][03 05][00] v34.2.0.9 -> v34.2.0.9 <------ not known
[00015440][03 06][00] v2.4.0.5 -> v2.4.0.5 <------ not known
[00015482][04 00][00] v1.41.0.0 -> v1.41.0.0 <---- IMU Pid (not sure)
[00015681][11 00][00] v1.7.0.0 -> v1.7.0.0 <---- Intelligent Battery
[00015781][12 00][00] v1.10.0.0 -> v1.10.0.0 <---- ESC Motor driver
[00015864][12 01][00] v1.10.0.0 -> v1.10.0.0 <---- ESC Motor driver
[00015960][12 02][00] v1.10.0.0 -> v1.10.0.0 <---- ESC Motor driver
[00016034][12 03][00] v1.10.0.0 -> v1.10.0.0 <---- ESC Motor driver
[00028573][15 00][00] device not detected. <---- TX VIDEO stream packet buffer
[00028650][17 00][00] v1.1.1.7 -> v1.1.1.7 <------ Gimbal stuff (not known exactly)
[00028770][17 01][00] v1.0.2.7 -> v1.0.2.7 <------ Gimbal stuff (not known exactly)
[00028830][19 00][00] v1.0.8.96 -> v1.0.8.96 <------ same not known
[00028868][01 00][00] v1.26.4315 -> v1.26.4315 <---- Ambarella ARM9 code
[00028908][01 01][00] v1.26.4315 -> v1.26.4315 < ---- Ambarella ARM9 boot (enable main chip to firmware update)
[00041452][08 00][00] device not detected. <---- TI DSP (DaVinci) live video enc/compressor/streamer (NOT ON P3A)
[00041511][09 00][00] v2.13.0.0 -> v2.13.0.0 <----- not known
[00041557]Packet upgrade failed at version checking.I'm going on my bad memory .. so I will check later in the lab.
Oso
Premium Pilot
Last edited:
I have tried IMU calibration, calibrating the sticks, every version of the FW more than once. I've checked and rechecked all the cables. I've formatted three different SD cards repeatedly on the bird and on my computer. I'm currently at 1.5.3 on the AC and 1.5.7 on the RC. Still no video down link. I've reconfirmed that I can record videos and stills, just no down link.
I checked my purchase date and I have two more days on my six month warranty so I am calling DJI this afternoon and starting the return process with them. I'll post whatever info I get from them on this thread.
Thanks everyone for all the help.
Kevin H.
I checked my purchase date and I have two more days on my six month warranty so I am calling DJI this afternoon and starting the return process with them. I'll post whatever info I get from them on this thread.
Thanks everyone for all the help.
Kevin H.
Oso
Premium Pilot
Called DJI, got an RMA number and sent it back yesterday. I called them two days short of six-months since I bought it, so I hope I don't get any hassle on warranty repairs. I'll post back here when I get it back. I only had about a two minute wait to get someone on the phone at DJI; she was very helpful trying to diagnose the issue on the phone, but she quickly realized and agreed with me that it had to go back for repair. So far so good.
Kevin
Kevin
