Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

FCC Mode Question

Discussion in 'Phantom 2 Vision + Discussion' started by Radiohead97, May 18, 2014.

  1. Radiohead97

    Joined:
    May 18, 2014
    Messages:
    1
    Likes Received:
    0
    Just wondering how to activate FCC Mode on the TX. Do I turn both potentiometer knobs clockwise or just the lower one?
     
  2. KG4MXV

    Joined:
    Mar 29, 2014
    Messages:
    198
    Likes Received:
    1
    just the lower one with the power off.

    then power it back on and you should hear two beeps.
    Be careful when turning the pots as they can be easily damaged.
     
  3. chriske

    Joined:
    May 8, 2014
    Messages:
    44
    Likes Received:
    0
    I opent the whole controller then turned to fcc. It wasnt easy with the controller in tact for me.
     
  4. Mori55

    Joined:
    Feb 13, 2014
    Messages:
    1,993
    Likes Received:
    6
    Location:
    NJ-USA
    Why open it ? There's a screw on the back. If you hear two beeps when you turn it on its in FCC mode.
     
  5. chriske

    Joined:
    May 8, 2014
    Messages:
    44
    Likes Received:
    0
    well that tiny hole didnt work for me so i opent it up before i do any dmg to it. After i opent it it was realy easy to twist it. When u open tho make sure u watch out for the usb connector, u need to unplug it before you can open the controller.