Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Error 29 - constant fast flashing red LED

Discussion in 'Phantom 1 Help' started by tonyblack, Jul 26, 2013.

  1. tonyblack

    Joined:
    Jul 26, 2013
    Messages:
    1
    Likes Received:
    0
    Hoping someone can shed some light on this. After starting TX and then connecting battery to Phantom I get the following LED sequence. Note: Although it looks yellow in the video the LED is in fact flashing red. This goes on continuously. Prior to this the Phantom was flying fine.

    http://youtu.be/ObK7tHpso1M

    [youtube]http://youtu.be/ObK7tHpso1M[/youtube]

    When plugged into the Nazam Assistant software on the PC I am getting 'Error 29' (see image below).
    I've recalibrated my controller multiple times and had the top of the Phantom to check cables. Nothing seems untoward in there. Can anyone shed any light on this?
     

    Attached Files:

  2. tanasit

    Joined:
    Jan 28, 2013
    Messages:
    554
    Likes Received:
    2
    One of the 3. (most likely 2)

    1. What is the position of your TX throttle stick when you plugged in the battery?

    2. You may want to rebind the TX to the RX.

    3. Are you sure that the pack is full?