New firmware updates are available for the Phantom 3 series, please visit the Phantom 3 Professional and Phantom 3 Advanced product pages to download and update your firmware. For the Phantom 4, Phantom 3 4K and Phantom 3 Standard, please update via the DJI GO app. The Phantom 4 firmware version number is updated to v1.0.0288, the Phantom 3 Professional and Phantom 3 Advanced firmware version number is updated to v1.7.0060, the Phantom 3 4K firmware version is updated to v1.3.20, and the Phantom 3 Standard firmware version is updated to v1.4.60. Both DJI GO app iOS version and Android version are updated to v2.7.0. For the Phantom 4: What’s New： 1. Improved download speed for photo and video files. 2. Changed procedure for stopping motors during flight. To stop motors during flight, pull the left stick to the bottom inside corner while simultaneously pressing the Smart RTH button. This new procedure will only become available when Remote Controller firmware is updated to the latest version. 3. Optimized Low Battery descent logic. 4. Added support for HDMI expansion module on the remote controller. 5. Optimized control stick movement performance in TapFly mode. 6. Added support for recognizing non-human subjects. 7. Optimized sound effect for powering on the aircraft. 8. Added propeller guard detection. Obstacle Sensing system is automatically disabled when a propeller guard is installed. For the Phantom 3 Professional and Phantom 3 Advanced: What’s New： 1. Improved compass accuracy. 2. Fixed issue of image being corrupted in rare occasion. Notes： The firmware can be downgraded to v1.6.0040. For the Phantom3 4k and Phantom 3 Standard: What’s New: 1. Improved compass accuracy. 2. Fixed unprompted exits from HDR mode. Notes: DO NOT turn off the remote controller or exit DJI GO app during the update process.