CE or FCC Phantom 3 advanced

[Kyokushin]

We was flying together with 300A and EU mode and we also needed to set channels manually. There was huge interferences.

 

[Kyokushin]

And another repply from DJI, from the same Customer person who wrote it is set in factory.

"I just confirmed that the version will be changed automatically per the GPS position.
Sorry for making you misunderstood."

It seems Tahoe ED was right. And this is a good news at all.

 

[fastmike]

What I can tell is the Tx power will change according to region you are using your P3. So it does not seem to have an hardware difference. Now the issue is that DJI decided to limit transmit power for Europe without leaving you the ability to overide that at your own risk making their drones useless for Professional use. I was able to initillay fly up to 5 miles in US and 3 + miles when in France. With last firmware I can barely get to half a mile...

 

[robinb]

If you are getting only half a mile then something else is wrong.

 

[Shineyshiner]

No a work around has not been found yet, and it's not set by GPS location. Even dji direct will tell you that.

Not sure if this helps

 

[Numone]

Not sure if this helps

Worth a try but I suspect this will not work....