Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

ce/fcc with p2 2.4g

Discussion in 'Phantom 2 Discussion' started by jeeperak, Jul 28, 2014.

  1. jeeperak

    Joined:
    Jul 28, 2014
    Messages:
    5
    Likes Received:
    0
    I see everywhere ppl talking about changing to fcc on the 5.8. Can you do the same on the 2.4g tx?

    Thanks for any insight fellas

    Jeeperak
     
  2. jeeperak

    Joined:
    Jul 28, 2014
    Messages:
    5
    Likes Received:
    0
  3. TeamYankee

    Joined:
    May 30, 2014
    Messages:
    491
    Likes Received:
    42
    Location:
    Swansea, Wales, UK
    As far as I'm aware, the 2.4Ghz transmitter on the Phantom 2 does not have a CE / FCC mode switch.
    The P2 Vision Rc controller beeps when you turn it on to indicate what mode it's in. The P2 transmitter doesn't beep.

    Legal limit in the US is 1,000 mW effective radiated power on 2.4Ghz. In the UK the limit is 100mW.

    I've no ideas what the output power on the P2 transmitter is, maybe someone has tested it ?

    DJI wiki says:

    http://wiki.dji.com/en/index.php/Phanto ... RANSMITTER

    Nothing on the P2 output power though... maybe it doesn't comply ?

    Edit: did find this confusing info though:
    http://wiki.dji.com/en/index.php/Phanto ... 8D11.1V.29

    "Power Consumption of TX: <20dBm" - power consumption? measured in dBm ? hmm..

    Looks like it would be around 100mW
     
  4. jeeperak

    Joined:
    Jul 28, 2014
    Messages:
    5
    Likes Received:
    0
    thank you sir very much. i was figuring this was the case but, i am wrong quite often.