Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Camera won't tilt on p3a

Discussion in 'Pro/Adv Discussion' started by Jordi555, Oct 2, 2016.

  1. Jordi555

    Joined:
    Aug 4, 2016
    Messages:
    13
    Likes Received:
    2
    Just flown my bird...5 mins in the gimbal tilt stopped working
    Turned everything off and re booted
    Problem still there
    Did a gimbal calibration,all seemed fine
    I can slide my finger up and down the screen and it moves ok. Just cant control it from the transmitter wheel. I can flip it up and down from the switch

    Any thoughts would be appreciated
    Cheers
     
  2. msinger

    Approved Vendor

    Joined:
    Oct 30, 2014
    Messages:
    19,061
    Likes Received:
    5,611
    Location:
    US
    Try calibrating the remote controller in DJI GO.

     
  3. Jordi555

    Joined:
    Aug 4, 2016
    Messages:
    13
    Likes Received:
    2
    Just
     
  4. Jordi555

    Joined:
    Aug 4, 2016
    Messages:
    13
    Likes Received:
    2
    Just tried that
    Still not working
     
  5. msinger

    Approved Vendor

    Joined:
    Oct 30, 2014
    Messages:
    19,061
    Likes Received:
    5,611
    Location:
    US
    Did you move the wheel up and down during the calibration process? If so, then check your Gimbal Tilt EXP setting. If it's set close to 0, the gimbal will move very slowly when you attempt to tilt it.

    DJI-GO-Gimbal-Tilt-EXP.jpg
     
  6. Jordi555

    Joined:
    Aug 4, 2016
    Messages:
    13
    Likes Received:
    2
    Not quite sure what I've done but its working OK now
    Thanks mate