Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Antigravity MN2214 Motors work with the stock Blades?

Discussion in 'Phantom 2 Vision Discussion' started by James Cole, Nov 26, 2013.

  1. James Cole

    Joined:
    Nov 19, 2013
    Messages:
    103
    Likes Received:
    1
    Just as the title states? I got someone selling me some T-motors MN2214 for the phantom... And I would like to know if the fit with the stock propellers... thanks!
    JC
     
  2. Driffill

    Joined:
    Jun 14, 2013
    Messages:
    529
    Likes Received:
    3
    From memory the 2214 is a direct replacement for the phantom motors, I'm pretty sure it has the flat spots on the shaft like the stock motors. 2214-11 is the reverse threaded type
     
  3. James Cole

    Joined:
    Nov 19, 2013
    Messages:
    103
    Likes Received:
    1

    So that means they will be direct replacement using stock blades? They will auto-screw the same
    And all?

    Thanks for your response!
    JC
     
  4. Driffill

    Joined:
    Jun 14, 2013
    Messages:
    529
    Likes Received:
    3
    Hmmmm, I should have been a little more specific.
    The original phantom with keyed props use the 2214 model motors, the self tightening prop will need the reversed threaded motor for two of the props . . .

    I'm not sure if the reverse threaded motors/kit have the shaft flat spots as the self tightening props wouldn't have that keyway setup (but stock props do).

    Original standard phantom - 4xMN2214
    or upgrade to 2xMN2214 + 2xMN2214-11

    Phantom Vision/(late model phantoms, w/self tightening props)
    Must use 2xMN2214 + MN2214-11