Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Antenna question P2V+

Discussion in 'Phantom 2 Vision + Mods' started by luckypriest, Dec 19, 2014.

  1. luckypriest

    Joined:
    Dec 19, 2014
    Messages:
    4
    Likes Received:
    0
    I currently have my wifi repeater on my P2V+ modded, on one side I put a 9 db omni directional antenna, on the other one I Have a 14 db TPlink directional antenna. I have not tried this with my amplifier yet (misplaced one rp-sma-rpsma female cable) however my fpv video cuts out at about 1200 or so feet (city) even when being pointed directly at. This worried me as this is roughly what I was getting with the stock antenna, is there anything wrong with my setup? My phantom is stock but I am thinking about getting these: http://fpvlr.com/shop/index.php?route=p ... uct_id=110
     
  2. luckypriest

    Joined:
    Dec 19, 2014
    Messages:
    4
    Likes Received:
    0
  3. Roseto75

    Joined:
    Nov 22, 2014
    Messages:
    35
    Likes Received:
    0
    if you have increased the limits in your phantom software, then the problem resides with the antennas.
    Omnis that are too high gain are not good for flying FPV, you need good directional ones.
     
  4. luckypriest

    Joined:
    Dec 19, 2014
    Messages:
    4
    Likes Received:
    0