Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

After ribbon replacement camera haywire Video below

Discussion in 'Phantom 2 Vision + Help' started by Phantomrasberryblower211, Apr 13, 2016.

  1. Phantomrasberryblower211

    Joined:
    Apr 9, 2016
    Messages:
    15
    Likes Received:
    0
    Me again! I have now replaced the ribbon cable on the gimbal and my drone does this when I turn it on?


    Sent from my iPod touch using PhantomPilots mobile app
     
  2. Bogwan

    Joined:
    Dec 10, 2015
    Messages:
    47
    Likes Received:
    3
    Try recalibration of the camera an IMU
     
  3. tomstr

    Joined:
    Oct 24, 2015
    Messages:
    75
    Likes Received:
    2
    I had the same problem...recheck the ribbon at each board,make sure each one is latched probably and making contact..the reason it beeps is one of the contacts is off...