Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

After a crash diagnostics

Discussion in 'Phantom 2 Vision Help' started by phantomi, Oct 13, 2014.

  1. phantomi

    Joined:
    Jul 17, 2014
    Messages:
    502
    Likes Received:
    62
    Hi. Today I had the first very bad crash of my Phantom Vision resulting with a bend and fractured arm. The battery and the camera were recovered near the phantom, and everything were reassembled. It power up normally, all the motors functioning like new, it takes 7+ satellites but... The only problem is that the leds under the bended arm stay off. What could this mean? A bad ESC? I ordered a new shell. Please give me any advice or diagnostic in relation to this. Thanks.
     

    Attached Files:

  2. phantomi

    Joined:
    Jul 17, 2014
    Messages:
    502
    Likes Received:
    62
    Thanks Geert. I will replace the ESC too and do the IMU calibration before any attempt to take off.
     
  3. phantomi

    Joined:
    Jul 17, 2014
    Messages:
    502
    Likes Received:
    62
    Are all the ESC of a Phantom Vision the same, or I have to ordered a specific ESC replacement part?
     
  4. phantomi

    Joined:
    Jul 17, 2014
    Messages:
    502
    Likes Received:
    62
    Thanks again.