Have a question about adding a amp to the wifi 2.4 side of my DBS mod. On the RC side 5.8, it would be without question that the side of the amp marked "radio" (input end) is connected to the RC as that's the signal we want to increase. But on the wifi 2.4 side isn't the opposite true, that the signal we want to increase is the signal the antenna is picking up. So do we reverse the amp? By putting the input end (marked radio) to the DBS antenna. I've yet to read this in any treads, but it has me thinking. This dawned on me when reading a thread on booters of the P3S and someone posted the question that on the wifi signal wouldn't the drone be the part that needed an amp (not the RC), as it's a data downlink to the controller. The person that replied answered, just think of it as a hearing aid for you controller, that's way it works being on the controller end. That's what got me thinking about which way the amp would need to be installed to act as a booster for the wifi signal coming FROM the drone to the RC. Any tech people out there?