[00040789][08 00][00] device not detected issue

Joined
May 27, 2015
Messages
34
Reaction score
2
Age
39
Location
Orlando, FL
Hey Guys! I recently opened a topic in the Help section, since I thought that my transmitter was the problem (broken), but I just got my new transmitted and I can't get the image to work.

A little story on my P3P... Bought it about a year and a half ago... Been using it flawlessly until one day it just stopped working... I did lend it to a co-worker (it's a work drone) and he messed up the remote... shortly after he quit so I can't get in touch with him... The thing is that even after he brought it back, I was able to fly it with no problems... One day I tried putting an iPad to the transmitter and then is where everything went sour... Doesn't matter how many times I try, I cannot see the image... I can, however, fly the drone, control it, take pictures and videos, but I just can't see the image transmission on my phone... I have upgraded the firmware on my transmitter, I can't seem to be able to upgrade my bird... I pulled the log, and effectively, like said many times before 8 and 15 have the dreaded device not detected...

Any suggestions here? What are my options? I have a friend with a crashed P3P that I may be able to get the camera & gimbal, if that ends up being the problem.

Thanks!
 
Ok, now that I'm fully reading my log I'm confused... sometimes it shows as upgraded and sometimes as in need upgrade, and sometimes as in not detected... I'll just paste the whole **** log :)

[00014234][01 00] Firmware upgrade finished successfully.
[00014338]Done.

[00014367]Packet [C:\P3X_FW_V01.02.0006.bin] resumed, card sn [0x00fc997c].
[00014398]Version checking[2]...
[00014479][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00014539][03 06][00] v2.1.6.18 -> v2.2.6.8 need upgrade.
[00014575][04 00][00] v1.36.0.0 -> v1.38.0.0 need upgrade.
[00014628][09 00][00] v1.7.0.3 -> v1.7.0.3
[00014719][11 00][00] v1.6.0.0 -> v1.6.0.0
[00014789][12 00][00] v1.8.0.0 -> v1.8.0.0
[00014854][12 01][00] v1.8.0.0 -> v1.8.0.0
[00014920][12 02][00] v1.8.0.0 -> v1.8.0.0
[00014994][12 03][00] v1.8.0.0 -> v1.8.0.0
[00015108][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015189][17 00][00] v1.1.1.2 -> v1.1.1.6 need upgrade.
[00015289][17 01][00] v1.0.2.4 -> v1.0.2.5 need upgrade.
[00015329][19 00][00] v1.0.8.59 -> v1.0.8.96 need upgrade.
[00015359][01 00][05] v1.15.3056 -> v1.15.3056
[00015389][01 01][00] v1.6.2736 -> v1.15.3056 need upgrade
[00015434][08 00][00] v0.11.0.4 -> v0.11.0.4
[00015461]Done.

[00015490]Firmware upgrading[2]...
[00015628][01 01] Firmware upgrade start...
[00045864][01 01] Firmware upgrade finished successfully.
[00045919][17 00] Firmware upgrade start...
[00165412][17 00] Firmware upgrade finished successfully.
[00165452][17 01] Firmware upgrade start...
[00225498][17 01] Firmware upgrade finished successfully.
[00225541][03 05] Firmware upgrade start...
[00296902][03 05] Firmware upgrade finished successfully.
[00297108][03 06] Firmware upgrade start...
[00602411][03 06] Firmware upgrade finished successfully.
[00605166][19 00] Firmware upgrade start...
[00770895][19 00] Firmware upgrade finished successfully.
[00770952][04 00] Firmware upgrade start...
[00828023][04 00] Firmware upgrade finished successfully.
[00828052]Done.

[00828081]Version checking[3]...
[00828157][03 05][05] v34.2.0.9 -> v34.2.0.9
[00828217][03 06][05] v2.2.6.8 -> v2.2.6.8
[00828292][04 00][05] v1.38.0.0 -> v1.38.0.0
[00828353][09 00][00] v1.7.0.3 -> v1.7.0.3
[00828557][11 00][00] v1.6.0.0 -> v1.6.0.0
[00828648][12 00][00] v1.8.0.0 -> v1.8.0.0
[00828737][12 01][00] v1.8.0.0 -> v1.8.0.0
[00828837][12 02][00] v1.8.0.0 -> v1.8.0.0
[00828923][12 03][00] v1.8.0.0 -> v1.8.0.0
[00829047][15 00][00] v1.1.2.0 -> v1.1.2.0
[00829123][17 00][05] v1.1.1.6 -> v1.1.1.6
[00829243][17 01][05] v1.0.2.5 -> v1.0.2.5
[00829293][19 00][05] v1.0.8.96 -> v1.0.8.96
[00829322][01 00][05] v1.15.3056 -> v1.15.3056
[00829351][01 01][05] v1.15.3056 -> v1.15.3056
[00829389][08 00][00] v0.11.0.4 -> v0.11.0.4
[00829417]Packet upgrade finish successfully.



[00012447]========== remo-con disconnect. boot(15) ============
[00012481]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce35af].
[00012513]Packet upgrade start...

[00012548]Packet checking...
[00012581]Done.

[00012611]Version checking[1]...
[00012684][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012744][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00012781][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012829][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012940][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00013020][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013099][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013174][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013254][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013371][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013430][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00013529][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00013589][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013620][01 00][00] v1.15.3056 -> v1.23.3419 need upgrade
[00013659][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00013696][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013729]Done.

[00015760]Waiting for user confirm...
[00025791]Timeout, start upgrade automatically.

[00025858]Firmware upgrading[1]...
[00038026][01 00] Firmware upgrade start...
[00012229][01 00] Firmware upgrade finished successfully.
[00012270]Done.

[00012301]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x80ce35af].
[00012424]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012487]Version checking[2]...
[00012551][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012625][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00012663][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012714][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012826][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00012904][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012980][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013055][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013151][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013277][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013355][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00013480][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00013535][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013572][01 00][05] v1.23.3419 -> v1.23.3419
[00013602][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00013656][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013689]Done.

[00013721]Firmware upgrading[2]...
[00013868][01 01] Firmware upgrade start...
[00044119][01 01] Firmware upgrade finished successfully.
[00044978][08 00] Firmware upgrade start...
[00013025]========== remo-con disconnect. boot(15) ============
[00013055]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce35af].
[00013088]Packet upgrade start...

[00013126]Packet checking...
[00013182]Packet vlink 01.03.0020 <-> 01.01.0009.
[00013244]Done.

[00013278]Version checking[1]...
[00013349][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013402][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00013441][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00013493][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013608][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00013682][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013778][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013856][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013948][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014069][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014137][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00014337][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00014392][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014426][01 00][00] v1.23.3419 -> v1.23.3419
[00014456][01 01][00] v1.23.3419 -> v1.23.3419
[00014502][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00014539]Done.

[00016571]Waiting for user confirm...
[00026603]Timeout, start upgrade automatically.

[00026669]Firmware upgrading[1]...
[00027447][08 00] Firmware upgrade start...
[00562663][08 00] Firmware upgrade finished successfully.
[00562717][17 00] Firmware upgrade start...
[00605256][17 00] Firmware upgrade finish failed (step = 2, err = 0xaa).
[00635308][17 01] Firmware upgrade start...
[00695351][17 01] Firmware upgrade finished successfully.
[00695400][11 00] Firmware upgrade start...
[00742964][11 00] Firmware upgrade finished successfully.
[00743160][03 06] Firmware upgrade start...
[01046810][03 06] Firmware upgrade finished successfully.
[01046866][04 00] Firmware upgrade start...
[01104519][04 00] Firmware upgrade finished successfully.
[01104554]Done.

[01104586]Version checking[2]...
[01104664][03 05][00] v34.2.0.9 -> v34.2.0.9
[01104743][03 06][05] v2.2.6.19 -> v2.2.6.19
[01104787][04 00][05] v1.40.0.0 -> v1.40.0.0
[01104844][09 00][00] v1.7.0.3 -> v1.7.0.3
[01104963][11 00][05] v1.7.0.0 -> v1.7.0.0
[01105045][12 00][00] v1.8.0.0 -> v1.8.0.0
[01105135][12 01][00] v1.8.0.0 -> v1.8.0.0
[01105218][12 02][00] v1.8.0.0 -> v1.8.0.0
[01105298][12 03][00] v1.8.0.0 -> v1.8.0.0
[01105463][15 00][00] v1.1.2.0 -> v1.1.2.0
[01105535][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[01105653][17 01][05] v1.0.2.7 -> v1.0.2.7
[01105704][19 00][00] v1.0.8.96 -> v1.0.8.96
[01105736][01 00][00] v1.23.3419 -> v1.23.3419
[01105773][01 01][00] v1.23.3419 -> v1.23.3419
[01105814][08 00][05] v0.12.0.4 -> v0.12.0.4
[01105848]Done.

[01105879]Firmware upgrading[2]...
[01105942][17 00] Firmware upgrade start...
[01222014][17 00] Firmware upgrade finished successfully.
[01222046]Done.

[01222165]Version checking[3]...
[01222230][03 05][00] v34.2.0.9 -> v34.2.0.9
[01222323][03 06][05] v2.2.6.19 -> v2.2.6.19
[01222372][04 00][05] v1.40.0.0 -> v1.40.0.0
[01222431][09 00][00] v1.7.0.3 -> v1.7.0.3
[01222556][11 00][05] v1.7.0.0 -> v1.7.0.0
[01222646][12 00][00] v1.8.0.0 -> v1.8.0.0
[01222724][12 01][00] v1.8.0.0 -> v1.8.0.0
[01222812][12 02][00] v1.8.0.0 -> v1.8.0.0
[01222901][12 03][00] v1.8.0.0 -> v1.8.0.0
[01223025][15 00][00] v1.1.2.0 -> v1.1.2.0
[01223121][17 00][05] v1.1.1.7 -> v1.1.1.7
[01223246][17 01][05] v1.0.2.7 -> v1.0.2.7
[01223291][19 00][00] v1.0.8.96 -> v1.0.8.96
[01223325][01 00][00] v1.23.3419 -> v1.23.3419
[01223360][01 01][00] v1.23.3419 -> v1.23.3419
[01223406][08 00][05] v0.12.0.4 -> v0.12.0.4
[01223441]Packet upgrade finish successfully.



[00012467]========== remo-con disconnect. boot(15) ============
[00012501]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x80ce35af].
[00012536]Packet upgrade start...

[00012573]Packet checking...
[00012610]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012644]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012677]Done.

[00012707]Version checking[1]...
[00012785][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012860][03 06][00] v2.2.6.19 -> v2.3.0.13 need upgrade.
[00012899][04 00][00] v1.40.0.0 -> v1.41.0.0 need upgrade.
[00012960][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013085][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013178][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013278][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013365][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013465][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013591][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013690][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013812][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013860][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013891][01 00][00] v1.23.3419 -> v1.23.3419
[00013930][01 01][00] v1.23.3419 -> v1.23.3419
[00013981][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014015]Done.

[00016122]Waiting for user confirm...
[00026158]Timeout, start upgrade automatically.

[00026236]Firmware upgrading[1]...
[00026290][12 00] Firmware upgrade start...
[00092820][12 00] Firmware upgrade finished successfully.
[00092875][12 01] Firmware upgrade start...
[00158065][12 01] Firmware upgrade finished successfully.
[00158115][12 02] Firmware upgrade start...
[00223483][12 02] Firmware upgrade finished successfully.
[00223535][12 03] Firmware upgrade start...
[00292393][12 03] Firmware upgrade finished successfully.
[00292611][03 06] Firmware upgrade start...
[00604878][03 06] Firmware upgrade finished successfully.
[00604944][04 00] Firmware upgrade start...
[00663903][04 00] Firmware upgrade finished successfully.
[00663940]Done.

[00663972]Version checking[2]...
[00664063][03 05][00] v34.2.0.9 -> v34.2.0.9
[00664143][03 06][05] v2.3.0.13 -> v2.3.0.13
[00664182][04 00][05] v1.41.0.0 -> v1.41.0.0
[00664283][09 00][00] v1.7.0.3 -> v1.7.0.3
[00664409][11 00][00] v1.7.0.0 -> v1.7.0.0
[00664518][12 00][05] v1.10.0.0 -> v1.10.0.0
[00664624][12 01][05] v1.10.0.0 -> v1.10.0.0
[00664724][12 02][05] v1.10.0.0 -> v1.10.0.0
[00664822][12 03][05] v1.10.0.0 -> v1.10.0.0
[00664962][15 00][00] v1.1.2.0 -> v1.1.2.0
[00665052][17 00][00] v1.1.1.7 -> v1.1.1.7
[00665173][17 01][00] v1.0.2.7 -> v1.0.2.7
[00665263][19 00][00] v1.0.8.96 -> v1.0.8.96
[00665300][01 00][00] v1.23.3419 -> v1.23.3419
[00665337][01 01][00] v1.23.3419 -> v1.23.3419
[00665382][08 00][00] v0.12.0.4 -> v0.12.0.4
[00665423]Packet upgrade finish successfully.



[00012490]========== remo-con disconnect. boot(15) ============
[00012525]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x80ce35af].
[00012560]Packet upgrade start...

[00012604]Packet checking...
[00012640]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012676]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012709]Done.

[00012747]Version checking[1]...
[00012835][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012989][03 06][00] v2.3.0.13 -> v2.3.0.13
[00013036][04 00][00] v1.41.0.0 -> v1.41.0.0
[00013088][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013208][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00013330][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013413][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013503][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013583][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013722][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013794][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013929][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013989][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014023][01 00][00] v1.23.3419 -> v1.23.3419
[00014057][01 01][00] v1.23.3419 -> v1.23.3419
[00014111][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014149]Done.

[00016184]Waiting for user confirm...
[00026228]Timeout, start upgrade automatically.

[00026301]Firmware upgrading[1]...
[00026344][11 00] Firmware upgrade start...
[00073943][11 00] Firmware upgrade finished successfully.
[00073984]Done.

[00074021]Version checking[2]...
[00074094][03 05][00] v34.2.0.9 -> v34.2.0.9
[00074174][03 06][00] v2.3.0.13 -> v2.3.0.13
[00074216][04 00][00] v1.41.0.0 -> v1.41.0.0
[00074312][09 00][00] v1.7.0.3 -> v1.7.0.3
[00074436][11 00][05] v1.7.0.0 -> v1.7.0.0
[00074527][12 00][00] v1.10.0.0 -> v1.10.0.0
[00074603][12 01][00] v1.10.0.0 -> v1.10.0.0
[00074703][12 02][00] v1.10.0.0 -> v1.10.0.0
[00074807][12 03][00] v1.10.0.0 -> v1.10.0.0
[00074957][15 00][00] v1.1.2.0 -> v1.1.2.0
[00075038][17 00][00] v1.1.1.7 -> v1.1.1.7
[00075158][17 01][00] v1.0.2.7 -> v1.0.2.7
[00075213][19 00][00] v1.0.8.96 -> v1.0.8.96
[00075249][01 00][00] v1.23.3419 -> v1.23.3419
[00075283][01 01][00] v1.23.3419 -> v1.23.3419
[00075333][08 00][00] v0.12.0.4 -> v0.12.0.4
[00075370]Packet upgrade finish successfully.



[00016142]========== remo-con disconnect. boot(15) ============
[00016260]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00016366]Packet upgrade start...

[00016515]Packet checking...
[00016734]Packet vlink 01.09.0060 <-> 01.08.0080.
[00016834]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00016919]Done.

[00017028]Version checking[1]...
[00017181][03 05][00] v34.2.0.9 -> v34.2.0.9
[00017325][03 06][00] v2.3.0.13 -> v2.4.20.18 need upgrade.
[00017452][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00017640][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00017846][11 01][00] v1.7.0.0 -> v2.0.0.33 need upgrade.
[00017993][12 00][00] v1.10.0.0 -> v1.10.0.0
[00018173][12 01][00] v1.10.0.0 -> v1.10.0.0
[00018353][12 02][00] v1.10.0.0 -> v1.10.0.0
[00018533][12 03][00] v1.10.0.0 -> v1.10.0.0
[00031142][15 00][00] device not detected.
[00031310][17 00][00] v1.1.1.7 -> v1.1.1.7
[00031529][17 01][00] v1.0.2.7 -> v1.0.2.7
[00031666][19 00][00] v1.0.8.96 -> v1.0.8.96
[00031744][01 00][00] v1.23.3419 -> v1.30.5036 need upgrade
[00031856][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00044465][08 00][00] device not detected.
[00044605][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00044753]Done.

[00046866]Waiting for user confirm...
[00056974]Timeout, start upgrade automatically.

[00057117]Firmware upgrading[1]...
[00069188][01 00] Firmware upgrade start...
[00014226][01 00] Firmware upgrade finished successfully.
[00014273]Done.

[00014309]Packet [C:\P3X_FW_V01.09.0060.bin] resumed, card sn [0x80ce35af].
[00014351]Packet vlink 01.09.0060 <-> 01.08.0080.
[00014387]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014432]Version checking[2]...
[00014508][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014588][03 06][00] v2.3.0.13 -> v2.4.20.18 need upgrade.
[00014638][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00014753][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00014868][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
[00014906][11 01][00] v1.7.0.0 -> v2.0.0.33
[00014996][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015076][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015161][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015355][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027895][15 00][00] device not detected.
[00027977][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028122][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028172][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028208][01 00][05] v1.30.5036 -> v1.30.5036
[00028245][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00040789][08 00][00] device not detected.
[00040853][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00040888]Done.

[00040922]Firmware upgrading[2]...
[00041066][01 01] Firmware upgrade start...
[00071325][01 01] Firmware upgrade finished successfully.
[00071375][11 00] Firmware upgrade start...
[00117928][11 00] Firmware upgrade finished successfully.
[00118183][03 06] Firmware upgrade start...
[00491828][03 06] Firmware upgrade finished successfully.
[00491886][09 00] Firmware upgrade start...
[00549811][09 00] Firmware upgrade finished successfully.
[00549873][04 00] Firmware upgrade start...
[00608056][04 00] Firmware upgrade finished successfully.
[00608093]Done.

[00608130]Version checking[3]...
[00608199][03 05][00] v34.2.0.9 -> v34.2.0.9
[00608299][03 06][05] v2.4.20.18 -> v2.4.20.18
[00608353][04 00][05] v1.44.0.0 -> v1.44.0.0
[00608459][11 00][05] v1.8.0.0 -> v1.8.0.0
[00608579][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00608620][11 01][00] v1.8.0.0 -> v2.0.0.33
[00608721][12 00][00] v1.10.0.0 -> v1.10.0.0
[00608803][12 01][00] v1.10.0.0 -> v1.10.0.0
[00608900][12 02][00] v1.10.0.0 -> v1.10.0.0
[00608985][12 03][00] v1.10.0.0 -> v1.10.0.0
[00621529][15 00][00] device not detected.
[00621605][17 00][00] v1.1.1.7 -> v1.1.1.7
[00621730][17 01][00] v1.0.2.7 -> v1.0.2.7
[00621785][19 00][00] v1.0.8.96 -> v1.0.8.96
[00621827][01 00][05] v1.30.5036 -> v1.30.5036
[00621869][01 01][05] v1.30.5036 -> v1.30.5036
[00634405][08 00][00] device not detected.
[00634468][09 00][05] v3.0.0.10 -> v3.0.0.10
[00634503]Packet upgrade failed at version checking.



[00014612]========== remo-con disconnect. boot(15) ============
[00014738]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00014781]Packet upgrade start...

[00014832]Packet checking...
[00014879]Packet vlink 01.09.0060 <-> 01.08.0080.
[00014925]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014969]Done.

[00015011]Version checking[1]...
[00015110][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015190][03 06][00] v2.4.20.18 -> v2.4.20.18
[00015244][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015368][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015488][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015538][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015648][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015738][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015837][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015939][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028481][15 00][00] device not detected.
[00028573][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028721][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028789][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028831][01 00][00] v1.30.5036 -> v1.30.5036
[00028881][01 01][00] v1.30.5036 -> v1.30.5036
[00041426][08 00][00] device not detected.
[00041489][09 00][00] v3.0.0.10 -> v3.0.0.10
[00041533]Packet upgrade failed at version checking.



[00014551]========== 2016.11.01 18:12:49. boot(15) ============
[00014597]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00014640]Packet upgrade start...

[00014693]Packet checking...
[00014735]Packet vlink 01.09.0060 <-> 01.08.0080.
[00014785]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014830]Done.

[00014871]Version checking[1]...
[00014941][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015021][03 06][00] v2.4.20.18 -> v2.4.20.18
[00015071][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015201][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015341][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015385][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015490][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015681][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015764][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015861][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028406][15 00][00] device not detected.
[00028505][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028625][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028685][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028732][01 00][00] v1.30.5036 -> v1.30.5036
[00028781][01 01][00] v1.30.5036 -> v1.30.5036
[00041326][08 00][00] device not detected.
[00041387][09 00][00] v3.0.0.10 -> v3.0.0.10
[00041433]Packet upgrade failed at version checking.



[00101602]========== 2016.11.01 18:57:48. boot(15) ============
[00101651]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00101695]Packet upgrade start...

[00101746]Packet checking...
[00101791]Packet vlink 01.09.0060 <-> 01.08.0080.
[00101840]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00101888]Done.

[00101933]Version checking[1]...
[00102021][03 05][00] v34.2.0.9 -> v34.2.0.9
[00102119][03 06][00] v2.4.20.18 -> v2.4.20.18
[00102168][04 00][00] v1.44.0.0 -> v1.44.0.0
[00102304][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00102439][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
[00102484][11 01][00] v1.7.0.0 -> v2.0.0.33
[00102588][12 00][00] v1.10.0.0 -> v1.10.0.0
[00102689][12 01][00] v1.10.0.0 -> v1.10.0.0
[00102789][12 02][00] v1.10.0.0 -> v1.10.0.0
[00102889][12 03][00] v1.10.0.0 -> v1.10.0.0
[00115433][15 00][00] device not detected.
[00115527][17 00][00] v1.1.1.7 -> v1.1.1.7
[00115666][17 01][00] v1.0.2.7 -> v1.0.2.7
[00115721][19 00][00] v1.0.8.96 -> v1.0.8.96
[00115764][01 00][00] v1.30.5036 -> v1.30.5036
[00115810][01 01][00] v1.30.5036 -> v1.30.5036
[00128357][08 00][00] device not detected.
[00128421][09 00][00] v3.0.0.10 -> v3.0.0.10
[00128465]Done.

[00130509]Waiting for user confirm...
[00140553]Timeout, start upgrade automatically.

[00140640]Firmware upgrading[1]...
[00140698][11 00] Firmware upgrade start...
[00187656][11 00] Firmware upgrade finished successfully.
[00187771]Done.

[00187818]Version checking[2]...
[00187906][03 05][00] v34.2.0.9 -> v34.2.0.9
[00188007][03 06][00] v2.4.20.18 -> v2.4.20.18
[00188065][04 00][00] v1.44.0.0 -> v1.44.0.0
[00188182][11 00][05] v1.8.0.0 -> v1.8.0.0
[00188341][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00188388][11 01][00] v1.8.0.0 -> v2.0.0.33
[00188490][12 00][00] v1.10.0.0 -> v1.10.0.0
[00188590][12 01][00] v1.10.0.0 -> v1.10.0.0
[00188696][12 02][00] v1.10.0.0 -> v1.10.0.0
[00188796][12 03][00] v1.10.0.0 -> v1.10.0.0
[00201350][15 00][00] device not detected.
[00201449][17 00][00] v1.1.1.7 -> v1.1.1.7
[00201568][17 01][00] v1.0.2.7 -> v1.0.2.7
[00201623][19 00][00] v1.0.8.96 -> v1.0.8.96
[00201664][01 00][00] v1.30.5036 -> v1.30.5036
[00201713][01 01][00] v1.30.5036 -> v1.30.5036
[00214259][08 00][00] device not detected.
[00214321][09 00][00] v3.0.0.10 -> v3.0.0.10
[00214367]Packet upgrade failed at version checking.



[00012570]========== remo-con disconnect. boot(15) ============
[00012618]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00012666]Packet upgrade start...

[00012712]Packet checking...
[00012757]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012804]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012849]Done.

[00012892]Version checking[1]...
[00012962][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013038][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013086][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013219][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013362][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013405][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013512][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013612][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013712][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013812][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026358][15 00][00] device not detected.
[00026447][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026571][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026733][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026784][01 00][00] v1.30.5036 -> v1.30.5036
[00026829][01 01][00] v1.30.5036 -> v1.30.5036
[00039373][08 00][00] device not detected.
[00039433][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039478]Packet upgrade failed at version checking.



[00015587]========== remo-con disconnect. boot(15) ============
[00015638]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00015682]Packet upgrade start...

[00015733]Packet checking...
[00015785]Packet vlink 01.09.0060 <-> 01.08.0080.
[00015831]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00015875]Done.

[00015921]Version checking[1]...
[00015999][03 05][00] v34.2.0.9 -> v34.2.0.9
[00016079][03 06][00] v2.4.20.18 -> v2.4.20.18
[00016141][04 00][00] v1.44.0.0 -> v1.44.0.0
[00016264][11 00][00] v1.8.0.0 -> v1.8.0.0
[00016379][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00016422][11 01][00] v1.8.0.0 -> v2.0.0.33
[00016512][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016588][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016688][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016768][12 03][00] v1.10.0.0 -> v1.10.0.0
[00029311][15 00][00] device not detected.
[00029406][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029530][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029590][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029643][01 00][00] v1.30.5036 -> v1.30.5036
[00029688][01 01][00] v1.30.5036 -> v1.30.5036
[00042234][08 00][00] device not detected.
[00042309][09 00][00] v3.0.0.10 -> v3.0.0.10
[00042355]Packet upgrade failed at version checking.



[00012579]========== remo-con disconnect. boot(15) ============
[00012634]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x80ce35af].
[00012675]Packet upgrade start...

[00012727]Packet checking...
[00012777]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012826]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012870]Done.

[00012912]Version checking[1]...
[00012998][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013138][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013191][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013324][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013438][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013483][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013568][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013664][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013764][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013847][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026396][15 00][00] device not detected.
[00026514][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026648][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026713][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026757][01 00][00] v1.30.5036 -> v1.30.5036
[00026808][01 01][00] v1.30.5036 -> v1.30.5036
[00039354][08 00][00] device not detected.
[00039417][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039468]Packet upgrade failed at version checking.



[00014988]========== remo-con disconnect. boot(15) ============
[00015048]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xc1ee02ee].
[00015104]Packet upgrade start...

[00015171]Packet checking...
[00015228]Packet vlink 01.09.0060 <-> 01.08.0080.
[00015284]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00015342]Done.

[00015402]Version checking[1]...
[00015486][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015586][03 06][00] v2.4.20.18 -> v2.4.20.18
[00015649][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015806][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015928][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015983][11 01][00] v1.8.0.0 -> v2.0.0.33
[00016096][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016200][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016300][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016424][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028979][15 00][00] device not detected.
[00029096][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029266][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029342][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029403][01 00][00] v1.30.5036 -> v1.30.5036
[00029458][01 01][00] v1.30.5036 -> v1.30.5036
[00042111][08 00][00] device not detected.
[00042182][09 00][00] v3.0.0.10 -> v3.0.0.10
[00042242]Packet upgrade failed at version checking.​
 
Do you recall the date that the iPad no longer received video? My P3P was working great until yesterday. I turned on the iPad 4 MIni and saw the DJI Go app was "installing" something. It has updated software before automatically without my initiating it. Anyway, this morning the RC would not connect with the Phantom. I receive no video and the gimbal will not do anything. GPS appears to be OK, and I was able to start the motors. The Phantom also appears to now take longer to turn off after pressing the battery button. I am guessing some conflict with the new DJI Go app 3.0.2
 
Do you recall the date that the iPad no longer received video? My P3P was working great until yesterday. I turned on the iPad 4 MIni and saw the DJI Go app was "installing" something. It has updated software before automatically without my initiating it. Anyway, this morning the RC would not connect with the Phantom. I receive no video and the gimbal will not do anything. GPS appears to be OK, and I was able to start the motors. The Phantom also appears to now take longer to turn off after pressing the battery button. I am guessing some conflict with the new DJI Go app 3.0.2

That's the thing... I use an iPhone 7... before that an iPhone 6 and never had problems... the ONE day I tried using the iPad it stopped working and hasn't worked ever since... That was about 2 or 3 months ago
 
your gimbal main board is toast.

hence these two lines
[00028979][15 00][00] device not detected.
[00042111][08 00][00] device not detected.
 
your gimbal main board is toast.

hence these two lines
[00028979][15 00][00] device not detected.
[00042111][08 00][00] device not detected.


I've read about that... my one question is... how come?

I was using it OK... as soon as I disconnected it to use the iPad it stopped working... I hadn't upgraded any firmware yet or anything...

I can still move the gimbal, take pictures and videos with it...

I'm assuming that the board has a lightbridge module that is not working?
 
transmitter burned out. common issue on P3P gimbals. doesn't happen on P3A because they don't overheat and that little fan on top of the aluminum case ain't doing sh**.
it's there for cosmetic appearance :)
basically you had it on too long and it overheated. it happens to people all the time doing firmware upgrades without having a cooling fan bowing at full speed at the
phantom while the upgrade is being applied (20-30 minutes) and the transmitter inside simply burns out.
poor design. well it's DJI ;)
 
transmitter burned out. common issue on P3P gimbals. doesn't happen on P3A because they don't overheat and that little fan on top of the aluminum case ain't doing sh**.
it's there for cosmetic appearance :)
basically you had it on too long and it overheated. it happens to people all the time doing firmware upgrades without having a cooling fan bowing at full speed at the
phantom while the upgrade is being applied (20-30 minutes) and the transmitter inside simply burns out.
poor design. well it's DJI ;)

I'm assuming DJI doesn't sell the board by itself... Where can I find one? How much are talking about?
 
I've learned the hard way that, if your inside updating software or just adjusting settings, sit with a fan pointing in the direction of the unit (or do is somewhere cooler).

Some have suggested CPU cooling compound to replace the stock DJI "pads" that are supposed to transmit the heat into the casing. I'm wary of opening the case for fear of damaging another camera/gimbal.
 
I have added in bold text below what each module is that shows to be an issue in your logs. I hope it helps you understand what is what. Can you post which controller you have?

Btw, in looking at the logs it appears you are attempting to upgrade from version 1.4.1 to 1.8.8 and 1.9.6. I do not think you can jump the firmware versions that far out. There is versions 1.5, 1.6, 1.7 along the way.

[00042111][08 00][00] device not detected. - Lightbridge system
[00028979][15 00][00] device not detected. -Lightbridge system
[00015928][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support. - Smart Battery
 
Last edited:
  • Like
Reactions: ROD PAINTER
I have added in bold text below what each module is that shows to be an issue in your logs. I hope it helps you understand what is what. Can you post which controller you have?

Btw, in looking at the logs it appears you are attempting to upgrade from version 1.4.1 to 1.8.8 and 1.9.6. I do not think you can jump the firmware versions that far out. There is versions 1.5, 1.6, 1.7 along the way.

[00042111][08 00][00] device not detected. - Lightbridge system
[00028979][15 00][00] device not detected. -Lightbridge system
[00015928][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support. - Smart Battery

I have not upgraded my unit for about a year. I thought that the latest would actually help update the missing versions as well...

And yes, I just got a new transmitter now... Instead of being A it's a C
 
I have not upgraded my unit for about a year. I thought that the latest would actually help update the missing versions as well...

And yes, I just got a new transmitter now... Instead of being A it's a C

I stopped updating everything just over a year ago. Firmware 1.4.1 is better. My setup flies farther, faster, and the battery has not been cheated.
 
I've read about that... my one question is... how come?

I was using it OK... as soon as I disconnected it to use the iPad it stopped working... I hadn't upgraded any firmware yet or anything...

I can still move the gimbal, take pictures and videos with it...

I'm assuming that the board has a lightbridge module that is not working?


Pretty much identical circumstance to me, haven't used my P3P for a while, opened app and 'forced' to update and now my drone doesn't stream images anymore :(

Has anyone figured something out that could fix this? My P3P is out of warranty but this seems like a recall issue, firmware updates shouldn't destroy drones :)
 
Pretty much identical circumstance to me, haven't used my P3P for a while, opened app and 'forced' to update and now my drone doesn't stream images anymore :(

Has anyone figured something out that could fix this? My P3P is out of warranty but this seems like a recall issue, firmware updates shouldn't destroy drones :)
I ended up purchasing a new camera from @Ted4797 and everything worked perfectly from there on. He's a great guy to deal with :)
 
I ended up purchasing a new camera from @Ted4797 and everything worked perfectly from there on. He's a great guy to deal with :)
Thanks :) @Ted4797 what does it take to fix this problem (eg: What do I need to buy from you) ? Is it something a relative DIY n00b can handle? Posting here so others can see the answer in future perhaps...
 
Thanks :) @Ted4797 what does it take to fix this problem (eg: What do I need to buy from you) ? Is it something a relative DIY n00b can handle? Posting here so others can see the answer in future perhaps...
It's literally plug and play... I went to his place (since he's local to me) and in about 10 minutes we were done... that's without counting the 45 minutes we spent talking :D :D
 
  • Like
Reactions: Droneted
It's literally plug and play... I went to his place (since he's local to me) and in about 10 minutes we were done... that's without counting the 45 minutes we spent talking :D :D

Sounds like what I need... no chance you guys are in South Africa ? :) Which part of the drone is it, just the camera (lens/body) ? or the entire gimbal? Trying to figure out how I would do this
 

Members online

No members online now.

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,936
Latest member
hirehackers