troubleshooting

  1. D

    Switch Wlan Settings popup troubles

    Hello, I reclently bought a Phantom 3 SE after having a DJI Sparkle. I have some issues with it, I can connect to it and pilot it but i still have that popup going on screen and that is really annoying because it hides the camera vision on smartphone : I tried switching channels and Frequency...
  2. P-2

    Loosing video com.....

    But it’s always there on the card when viewed on the computer. We experienced this issue with an iPad mini And with a Galaxy...... same issue. Not sure about the FW or the upgrades. Any ideas.....TIA
  3. P-2

    Visual issues on the iPad

    Help???........ suddenly my P4 is loosing visual com with the iPad. When the flight is over, the video is fine but during flight...... Really blotchy ...... TIA
  4. E

    Can't upload photos

    I'm pretty new to this but I can't get my photos from the drone to the computer. I can view them in the app in my flight info and that's it. I've tried plugging the drone in to the computer and it shows there are no photos, I've tried taking the SD card out and putting it directly in to the...
  5. N

    Dji Phantom 3 pro activation help.

    I need some help. I got my Phantom 3 Pro in the mail today from Dji after they repaired the drone. I opened it, got it ready for takeoff. I activate it, I can't get past the entering a new username part. It says a error to check the connection. I tried a few times. I tried with a Samsung Tablet...
  6. N

    P3 Adv won't link with RC.

    Hey people, I have a P3 Adv that I've had a problem with. The drone has been untouched for the last 1.5 months or so. When I turned it on today the RC wouldn't connect, not even a signal from the camera. I updated the RC firmware and re-linked the P3 to the RC which gave me signal from the...
  7. M

    Drone is connected to app but I'm not getting any diagnostics? (Everything says n/a)

    So I'm in the film industry and have worked around drones but I decided to get one for more convenient purposes (phantom 3 standard). Long story short I got into an argument with a tree and lost and the gimbal broke...I have replaced the gimbal unit entirely, and it powers up/ corrects itself...
  8. D

    Phantom vision 2+ struggles in light breeze

    My vision 2+ has been in several 'hard landings' or crashes now. So far, I have only had to replace a few blades and one gimbal ribbon cable, but the drone is now struggling to handle even a light breeze in GPS mode. I'm talking 4 to 6 mph here. It used to take 15 mph in stride, but now it...
  9. Bernie1998

    Phantom 2 Vision Plus Camera and Gimbal not working

    Ok so I just bought a Phantom 2 Vision Plus off my friend knowing that the ribbon cable and role motor were broken on the gimbal. I bought a new ribbon cable off ebay and glued the motor back into position. After hooking it back up and putting it together I turned on the phantom and nothing. The...
  10. jpjurilla

    Phantom 3 Standard Camera Gimbal Misalignment and Motor Overload FIXED!

    I actually revised this thread I made since the earlier one was already irrelevant. The problem I raised was already solved and here's an update to my gimbal motor overload problem. I will share this here since I do not know how to delete this thread.
  11. rickeyfitts

    Comp-*** calibration story (w/ happy-ending)

    This morning I discovered the origin of the term Compass; COMP-lete + *** At least, that's how I felt after spending a couple of hours spinning around in the Compass Dance, then finally realizing my bone-head mistake. I hope this story may help someone else (or at least provides a chuckle or...