repair

Hi, Probably someone already touched this topic (then please just give a link to it) - do you know where could I get some schematics for P3P gimbal? If there is anyone who has tried to re-solder components on gimbal board I would be pleased to chat. Cheers

has anybody replaced the yaw arm on a P4P? I can't get the screws holding the yaw/roll motors to the yaw arm out. I've snapped off a couple philipps bits and stripped out the heads of most of the screws. anybody having this much trouble? one screw came out no problem but the others refuse to budge.

So I crashed my drone, and after replacing the broken propellers and vibration board, I was getting an accelerometer error. It was reading 16 G's so after googling, I determined this was the right fix: Fix for "NO MC DATA- ACCELEROMETER FAILED" if caused by impact. While lifting the ribbon...

I picked up a wrecked P4 that had been flown into a cliff. It still flies well, but as the gimbal is totally messed up and the camera gone = no live view. I really bought it just for the extra batteries that were included along with the one battery that had been in the crash and all batteries...

I accidenty flew my drone into some branches and it crashed into the ground. The gimbal broke along with the black flat wire but i see its repairable and i have been able to find the kit to replace it but i cant seem to find this one wire thats goldish and connects to this motor. Anyone know...

I crashed my Phantom 3 Standard last week. One wing snapped, but the case was mostly OK. Not so much for the gimbal. Video of gimbal issue: Whenever I turn on the unit, the gimbal sits slightly off centre and seems to be overloading. Diagnostics in the app are telling me everything's fine. I...

I rebuilt the gimbal arm after a major crash. New arm components and ribbon cable. I Still have some work to do on craft itself, but powered it on to test gimbal operation. Camera is jumping all over. Spins and beeps. Now I have many years as an electronics tech servicing high end Canon...

I purchased the Phantom 4 Pro on 10 November 2017. The very first time I calibrated the aircraft I noticed that the gimbal was trying to move in the opposite direction and making a strange sound. I thought this was normal because I had only just unpacked it from the box. I have only flown the...

- could I replace the camera assembly and legs and be good to go, or are there internals/calibration that has to be factory-performed? Asking for a friend.

Group to help each other through photographic details of hardware teardown procedures and repair. Procedure gurus are encouraged to participate. Issues need to be posted with pictures. Software issues as a result of teardown and repair is ok to share but not operational software issues.

I live in Manchester, NH. Recently our Standard 3 has refused to connect to WIFI. I have tried every trick and suggestion I've found on forums and on YouTube, with no success. I'd like to avoid sending it to DJI. We all know that their "customer service" is anything but! Does anyone know of...

(The picture at first is of the drone itself for about 5 seconds) Than the rest is narration and video of the modifications made to my controller to return it to a functioning state. The overall point is the outside cover for the on off switch on this particular model of controller is junk...

When I bought my P4A in July the only service plan offered was DJI Care Refresh, which I paid $139 to buy. While the info page stated that the aircraft could be replaced for a $99 additional fee, I thought that replacement was an option, and that repairs were covered too. So I crashed and...

Recently I crashed my drone. Into a tree and it fell in a pond. I got it back to working condition by replacing the OFDM Module and the Ribbon cable for the gimbal along with re-calibrating the gimbal motors. I noticed a heavy jello effect (https://photos.app.goo.gl/jI6RT8Du6l6WZyzg2) (I took...

I need a hands-on person who "knows their stuff." My P3 Advanced, which I had for a long time and flown very successfully, has suffered the forced upgrade of DJI Go 3.1.8 and therefore is messed up. Litchi still functions properly. Need a knowledgeable person here in SC to get things right...

I'm getting ready to send in my P3S to have the shell replaced after finding stress cracks (again) but my controller won't fit into the original box after mounting an Inspire 1 Device Holder to it. Is it absolutely necessary that I include my controller? All that they're (hopefully) going to do...

So I somewhat recently crashed my phantom 3 pro into a tree and then it fell into a pond. I then retrieved it and fixed the gimbal and everything except the video feed. I figured out it was the OFDM module that needs to be replaced. The module similar to what I have is at this link. I was...

I got my drone back about 2 weeks ago after a long long long repair process. I also brought a ND filter to be ready when the drone arrived back. When I got the drone I flew it a few times with the normal lens and everything was good and normal. I went to change the lens to the ND filter and as...

Hey guys, I was flying my phantom 3 until I crashed it into the side of my house. I have some pictures and I was wondering how much it would cost to replace. Also where could I get it replaced? The gimbal is still in the gutter and I am trying to get it out. Any help would be appreciated...

Howdy, I crashed my P3 Advanced and now the gimble/camera doesn't work properly. when I turn it on the camera bobs around and never gets set right and when I connect to the app there is no image. How do I go about trouble shooting the issue? I've check out a lot of videos and they seem to...