not working

  1. J

    Camera Settings and Shutter Buttons not availablie

    My drone flies wonderfully and there is an image coming through on the DJI go app. However I'm not able to take photos or videos, adjust settings or even reformat my sd because the buttons are simply not there in the DJI go app on iOS (photo attached) and greyed out on android. I have tried...
  2. Z

    DJI Phantom 3 Standard Gimbal Pitch/Tilt Issue.

    Okay, so I had a pretty bad crash with my DJI Phantom 3 Standard. Gimbal plate broke, flex cable and 2.4Ghz antennas ripped right out of the gimbal and stripped the connectors off the end that connects to the logic board of the gimbal. The plastic connector on the gimbal logic board was ripped...
  3. brokenprops115

    Phantom 4 video choppy/not playing when played on PC & Chromebook

    Hi, I currently own a Phantom 4 Advanced. Whenever I view the video files on my mobile device (iPhone 6) the video is amazingly smooth. Also, the video is perfectly smooth on a MacBook Pro. When I transfer the files to my PC from the Micro SD card, the video becomes terribly choppy and useless...
  4. C

    Phantom crashed and won't take off

    I got my first drone, a phantom 1, about a week ago. Its been a blast, and I love it. It came with three batteries but one of them was a bit bloated so I hadn't tested it out till yesterday. Everything was going fine till the drone just dropped from the sky onto a tree and hit the ground hard...
  5. L

    H3-3D seems not responsive

    hi , I bought recently a P2 with H3-3D and go pro 4. I use it in snow and a little of it wet the bottom of the H3-3D and the ribbon allimentation cable start to smoke , I after realise the cable had been dommaged att the connection with tilt motor. So i change the cabble but the gimbal seems...
  6. T

    I have image transmission but a dead gimbal

    I crashed my DJI Phantom 3 Adv. During the crash the gimbal ribbon cable ripped and the gimbal roll arm broke. I ordered a new ribbon cable, roll arm and a pitch motor just in case the current pitch motor also got damaged during the crash. I just installed the new ribbon cable, roll arm and...
  7. D

    Help - Technical Problem

    The other day I accidentally dropped my DJI Phantom 4 Pro carrying box on it's side from about 5 feet up. It didn't hit hard so I had no immediate concerns. Yesterday when I went out to fly my drone it began by powering up as normal and then I got two solid red lights on the left (battery...
  8. Z

    DJI GO 4 - Crashing non stop

    My DJI GO 4 keeps crashing during the initial splash screen ("DJI GO 4 has stopped" notice). It used to work, but not for the last two days or so... Can't get through it no matter what, even tried uninstalling and reinstalling. Anyone else having the same problem? Samsung Note 4 Android 6.0.1
  9. S

    FPV Issue - Black Pearl Monitor

    Hey everyone, I just finished following this tutorial: FPV With The DJI Phantom 2 – Everything You Need To Know and everything worked great right up until I turned on the Black Pearl monitor and, well, this happened: It is on channel 6, the rest of the channels don't show anything, if I...
  10. F

    "no image transmission signal" - "aircraft disconnected" after 1.flight

    Really appreciated if someone could help: - 1.flight out of the box was fine, forced me to do RC update and then I did aircraft update also - now I can't connect as dji app go says "aircraft disconnected" and under setting "gimbal disconnected" Almost tried everything - nothing helped -...
  11. T

    Initialization sensors do not seem active at all

    I have the IMU initialization error. I have set the P3 pro on level ground, and waited for it to initialize for 30 minutes, but it never does. I have turned the controller and app on 1st and opened up the IMU sensor panel. Then, turned on the drone, then hit IMU calibration, but nothing happens...
  12. V

    Big issue with the gimbal of my P3P !

    Hi, yesterday morning as usual I turned on the RC and then the Phantom, but the gimbal was acting very weird. I haven't crash it yet (I've got the drone since a few weeks only and never had a problem with it) so I don't know anything that could explain it.. Here is the problem: the camera can't...
  13. B

    P3A RC Cyan led and not updating

    Hey, I am trying to update my firmware on my RC for the phantom 3 advanced. Currently when i turn on the rc the status led is a cyan color. There also is no sound. The RC version is 1.5.80 and i would like it to go to the latest firmware. The aircraft currently is at the latest firmware. I have...