gimbal

My P3S crashed into a tree and the connector board got disconnected. The grey and black single wires I know can be re-attached but im not sure about the set that should go in the connector plug Is it possible to push that set of grey wires back in? because when i do try they are very slack and...

When I start up my drone, the gimbal will go through itself calibration and zero itself perfectly. After about 5 seconds it starts to float around on all three axis, before centering with the camera tilted downward. Also when I yaw the craft, and gimbal will tilt left or right depending on the...

Hello, I recently water damaged my phantom 3 - 4k gimbal main board. The dji does not repair it, since its a water damage. Anyone who have a phantom 3 - 4k gimbal main board or crashed his/her phantom but the gimbal board is fine. Please respond. Note: The model is phantom 3 - 4k. Not advance...

Hi I have problems with my Gimball to Phantom three standard picture works but not and the motors I have a faint buzzing sound from the motors I have changed the cables to gimbal are there more who have the same problem? Is there a wiring diagram you can look at? With kind regards Henrik

I have read through 3 pages of threads and have already replaced the parts they had recommended...except for any of the boards as they get pricey fast.... So I had a disconnect issue with my P4P, honestly think it was attacked by a bird, while doing a range test with some range extenders I...

Hi everyone. I recently ran into some peculiar issues with my phantom 4 pro gimbal. It has never crashed or landed hard, but I noticed a few days ago that the gimbal started making weird grinding noises upon start-up. I took it up in the air and instantly realized that I was getting gimbal...

I have noticed in recent footage that the horizon is a little cockeyed (not level). I placed the P4P+ on a level surface (0% according to my iPhone) and ran the IMU calibration and then the gimbal calibration. Then I took the P4P+ out for a flight. As soon as I turned on the P4P+ I noticed a...

Hi! I'm in desperate need of help. I don't know what happened, I used my Phantom 2 normally a few months ago, but now I bought a new controller and tried to fly it. Now both of the controllers are controlling the gimbal with one joystick instead of the propellers. The motors won't even start...

Hello everybody, I have a damaged Phantom 4 gimbal here and obviously this part is damaged. Does anybody know what it's doing and where to get a new one for repair? Edit: normally the microchip is covered by a spongy material and the PCB resides under the gimbal motor controller PCB in the...

Hi guys, I'm new here, couldn't find the topic for my problem so I posted new. I had phantom 3 std and now I have phantom 4, not much experienced but flying occasionally. My problem is twitching in roll axis, not much but disturbing me while recording steady shots. Anyone has the solution or...

After a crash, two props were damaged, and one of the arms separated a bit. Gimbal makes a strange noise now. Please look at the short video and let me know what you think. The camera works fine. I am concerned with the rattling noise that it is making. Here is a link to a short video.

Hello everyone QUESTIONs: What is the broken Part? Where can I find the replacement part? Context and background information: Last year I crashed my P3P into a tree... My gimbal broke into pieces and I had to repair it. The Drone works again, can fly, has a functional gimbal and can record...

Hello I’ve just brought a phantom 2 today for £100 . The drone dosnt have a camera or a gimbal . Just wonder if anyone can help me find a cheap camera and a gimbal

I recently cleaned out my prop motors and gimbal on my Phantom 4 because I was forced to land on a dirt path and it felt like there was dirt grinding around when I moved the gimbal up and down. I contacted a drone repair store and asked how to safely clean the gimbal. He suggested I rinse it...

I have phantom 3 standard for a long time, and only now every time I try to fly does the same error happen, I turn on the drone control and connect to the mobile application successfully, but after a few minutes the drone disconnects and appears in the application aircraft disconnected and when...

Hi. I don't pilot my Phantom 3 very often, and just recently I managed to crash it. Right with it's camera. I had the main axis-metal-thing broken and a flex wire ripped in half. So I replaced the two. The gimbal rotation works just fine, like it used to before the crash. But there is no image...

Hi everyone, I'm having an issue with a Phantom 4 Pro gimbal. The issue is after hand-launching the horizon remains slanted. I've hand-launched P4P's from ships dozens of times in the past without this issue. I understand that when the Phantom boots up the gimbal must auto calibrate, so when...

I have a Phantom 4 which had gimbal damage awhile back and ended up having the roll motor replaced. Since then I have a couple of symptoms that I can't get to the bottom of. On startup I need to hold the camera in position until it starts moving around or often it will end up hanging limp...

My P4P+ has been flying fine for the last 18 months with no problems. Today when starting up, the gimbal started initializing but has gotten hung up in the initial sequence and just moves up and down through the entire vertical motion, back and forth, without end. It won’t complete...

My gimbal on the P3S has gone nuts; violently shaking etc; tried all the fixes, to no avail - SO...IF I CAN'T fix it; who has upgraded from the STD to something else? Maybe P4 - what do you recommend? Thanks