gimbal motor overload

I flew the Phantom 4 Pro in fairly strong wind yesterday and after 20 minutes or so the camera view went sideways and 'Gimbal motor overload' error appeared. I landed and the camera went back to center and the gimbal seemed to respond to my inputs. I powered down and when powered up again...

I get this error message before even taking off. The message "ready to take off" and "gimbal motor overload" flash one right after the other. I am able to take it up but afraid to fly. Any suggestions besides update firmware. All updated. Thanks. Should have mentioned that there's nothing...

My gimbal is acting weird after a crash. The yaw arm was cracked and I replaced it with one I got online. When I turn the drone on it goes through it's normal routine and seems to level off and center pretty well but once it finishes the yaw twitches back and forth and the "gimbal motor...

Monday Sept. 11, I took off like normal, then on my way to where I was videoing, the gimbal cocked to the right and started shaking like crazy. I hurried and brought the drone back and landed. Then I turned the drone off, restarted it, and on the DJI GO app it said "gimbal motor overloaded." So...

So, my drone freaked out on me one day and came down and bent the yaw arm. I ordered another one AND the cable. I took everything apart and replaced both pieces. Made sure that the cable was installed correctly. I build electronic circuits so I am familiar with the ribbon cable clips and such. I...

Hi all, new to this. Just got my first drone in the mail: a Phantom 4. Immediately when I set it up I noticed the gimbal was twitching/jerking back and forth left to right, and I was getting a message about gimbal motor overload. I have tried the following so far: I checked the gimbal very...