firmware

Hey all, Just got my P3P. In my DJI app (version 2.8.6 iOS) I am receiving an error that my remote controller needs upgrading. I have downloaded and installed the new RC version (1.6.0) but the new firmware is not "sticking". In the "about" section is shows that the remote controller...

All, First, I want to introduce myself as a new PH4 owner. I'm not a total newbie, but this is my first higher end bird. A couple of questions: What is the best PH4 RC and drone firmware updates that you have used or recommend? Is there a consensus? Also if you have multiple batteries...

Hi. I have bought P3S and make firmware upgrade. Everything was ok. And now after 15 days I got a message an my phone that i need to upgrade. So I pressed start. In show me 20% and in 2 minutes "upgrade failed" here is a log from SD card " ========== 2016.07.25 20:59:16 =====================...

Does it exist for the P4? Was told that firmware updates are only available via DJI Go APP for the P4.

Hello, I am new to the drone world and picked up my P3A about 2 weeks ago. After spending a week reading/learning about it I began flying it. Although given the warnings that I need to update the firmware (apparently there are battery issues) I flew it a couple times (nothing further than 100 m...

Looking for some help with my phantom 4 after a mild crash (hit a tv inside a house). The drone was "non responsive" after the crash and required firmware updates to the drone and RC to get it back working. Now that everything is back up and running, the gimbal is "limp" ; by this I mean you can...

Hi guys, I have P4 for a month and did not face any problems prior to installing new firmware (the one which supposed to fix yaw yaw), now I have: - spontaneousl ascends and descends at full speed by 20-30 meters, SCARY - landing with 23 meters of altitude or negative altitude PLEASE those...

Tomorrow i will be going to a remote location to do photography with my P3 Advanced. There are roads and rivers in the region, so naturally I want to cache a map of the area. First time for that. Great... BUT....Sitting here at home before the trip to "cache the location" on my (Android)...

Hi, It's been one year since I haven't flied my P3A, and today I decided to test it before going on vacation. I tried to connect my iPhone 6S (iOS 9.3.2) to the controller with the same Apple cable I've always used, and nothing worked. The DJI Go app didn't detect my phone. (or.. my phone...

I bought this unit used and it worked right out of the box; starting/stopping, pairing with the transmitter, viewing real time with the app etc. I was able to put in about 10 hours of flight time in before the issue I describe below began. After researching the available software etc I used the...

Okay so this is going to be a very newbie question but hear me out, so I bought a new P3A on eBay running firmware 1.3.20 with the RC running 1.5.80 and the app 2.8.2 on a galaxy S6. So when I go to the DJI GO app there is no option to select 2.7k video, I'm guessing this is because the 2.7k...

Let's exclude issues surrounding NFZs and range. What is left to fix, in your opinion, in theP4 Firmware or the DJI Go app? Not new functionality, but a bug that hasn't been fixed yet? List, if you must, a very specific and direct extension of an existing function that you feel is crippled...

Thinking about upgrading my P3A but don't want to go to 1.9.60 since there are numerous reports here about issues. So I have decided to upgrade to 1.8.80. My question is: after upgrading the AC and batteries to 1.8.80 the controller is upgraded through DjI GO app but apparently that will be...

Hello all, as I own a P3 Standard as well as a P3 ADV, I used to share my 4 batteries between the two. I didn't had any trouble till now, but as the new P3 ADV firmware (01.09.0060) is updating also batteries firmware and so I have to cycle the update to all 4 batteries, I'm wondering if this...

Firmware update . . . need help! I was able to upgrade the firmware on my P3P aircraft and batteries. However, when I try to update my controller...nothing. I've tried both ways...by having the Micro-SD card in the aircraft and using my USB to Microport cable...nothing. Tried putting the SD...

Updated P3 Pro to latest firmware 1.9.60, and all went well until I turned it back on and tried to start the rotors. Received the error message: *Warning, ESC Status Error. Restart Aircraft*. I have recalibrate the IMU, reinstalled the DJI Go app. Still the same thing. Any ideas?

Hi all! I am rather new here but have been droning for a while. I am really frustrated with my DJI Phantom Pro 3. Not only has the video been jittery, no fix seems to work. I tried with the gimbal, resetting, updating the firmware on everything, doing IMU (twice), and everything in between...

Hey guys! Every time I update my drone, it adds info the the txt file. I never see just one update showing successful. I delete the txt file and then when I perform another update it does the same thing and keeps adding to the file. I also have an issue where the date is completely off. I...

Hi guys and gals! So I just updated my firmware to the newest 1.9.60 and everything went smoothly for my P3P and all 3 batteries. One question is about the remote controller/transmitter. It still shows 1.6.0. Is this normal? I tried updating the transmitter via USB drive as well as using a...

Whenever there is a new release of firmware there is no clear indication of whether it is for the aircraft, remote controller, or both. Since the remote is now updated via DJI Go, it requires a different process than the aircraft and is not quite as clear cut as to when an upgrade is needed. I...