firmware

Hi all, Hoping you can be of more assistance than DJI support were! I stupidly updated the RC firmware before doing the phantom. The phantom needs firmware upgrade too but because I did RC first, I can't do it from DJI go4 app (apparently?). For some reason I can't get connected via DJI...

After I finally (I had problems with the remote controller not updating giving me headaches) updated to the latest firmware for phantom 4 pro, I took it for a couple of tests and I immediately noticed that the video downlink had issues, stutter, static, somewhat bad range whereas before was just...

Hi All, I have a P3 standard and I'm thinking of purchasing the Litchi app in order to fly waypoint missions that may extend the RC range and then return back. My question, does anyone know if it's ok to go ahead and update the firmware to the latest one which came out this week or should I...

Hello, as you probably have seen DJI has a notice that says about the updated DJI go app and the mandatory log in. I'm ok with that but my question is that right now my P3P is on firmware 1.6.40 and haven't updated in a while due to the problems i kept hearing (from what i know things are ok...

Hello! I'm new to the Phantom 4 Pro, and am very confused on what firmware I should be running Is there a catalogue of what I should be running today? Seems like whenever there is an update, something goes wrong. Thanks

Hello Everybody, I just downgraded back to 01.03.0418. I've had zero issues with my P4P since I bought it, thankfully, but, I started having issues with firmware version 01.03.0509. I started out with 01.02.0304. I had no issues. It was great. I hesistantly upgraded to 01.03.0418 and again...

A few days ago I installed the new firmware on my p4pro drone and controller but since then I have been experiencing a very weak controller signal and aircraft gets disconnected immediately. Anyone of you experiencing the same issue?

I see the new firmware for the P4P has arrived - anyone heard when the firmware for the P3P is due? (or the inspire for that matter) Mike

Okay, so I recently bought my new Phantom 3 Standard on May 22. I started it up, did everything properly, and was expecting a long FIRMWARE update. There was nothing. I started the aircraft for flight, and it says "latest firmware" on the start screen. I had no update, while almost everybody...

I downloaded the file, extracted/unzipped the bin file, and pasted it onto the memory card using the micro USB cable. I unplugged the USB cable from the drone, and nothing. The gimble light just stays green. It doesn't flash between red and green, and it doesn't turn red, it just stays green...

So, I have a P3P. It's been in the closet for a while now because I have a Mavic Pro. But, it's time to update the P3P. Updated the RC to version 1.8.0. No problem. Updated the Phantom to 1.10.90. No apparent problem. Everything appeared to go as it should. When checking the 'about' information...

The current Phantom 2 firmware includes a function that automatically initiates a failsafe return-to-home when the GPS senses the Phantom is in controlled airspace (i.e., near an airport) and the craft climbs above a certain altitude (I think about 100 feet). Problem is, there are lots of cases...

Hi guys, Which version of DJI GO do you use for 1.7.6?

I recently received a new P4 in exchange for an older P4 whose vision system gave problems (DJI replaced it within the warranty period). I calibrated gimbal and compass before using it, and I downloaded the new DJI Go4 app on my Samsung Note 4 and I must say, I am afraid to fly now. Where my...

In an article Downgrading firmware on P3P from 1.10.9 to 1.7.6 the statement "If the DJI app shows version numbers like 1.7.6+ (note the plus sign), this means that some modules did not get rolled back as they should have." is made. Can others confirm this? I have searched the PhantomPilots...

I have an email into DJI support but I thought I would ask here as well. When I fly the Phantom4 pro+, if I am close by I have no issues, I can record video or switch to camera mode and take photo’s. All seems fine but when I get 250 Meters (approximately) away from the drone. Once I do...

Hi, I ordered a P3S drone the other day and now it has come to my attention of some firmware instabilities. I was wondering if the latest version, 1.08.10 works ok. Also does it work fine with Dji Go 3.1.7 (I heard of some problems with that app version, but can be fixed with aeroplane mode or...

Howdy pilots, It's been a while since I've been on these forums, to be frank I've not had great weather where I am (Warwickshire, UK) or much time to fly, but the weathers sure picking up now so it's about time I got out into the fields again. Anyway, last I recall, I needed to update my...

I need to understand what happened today: (Phantom 4) Fully charged batteries. Did preflight. Usual place for take off DJI GO4. Said Inconsistent firmware. I updated. Switched off controller and aircraft (Phantom 4) Turned on a/.c and controller (Controller 1st) Calibrated IMU and Gimbal...

I was flying with my kids a few weeks back and I was maybe 1000 ft out and in the hills outside of town when my P4 stopped responding to my commands and rth didn't initiate automatically. We stood there and watched as it flew back over the city and within minutes went down and out of sight...