esc

  1. S

    After crashed and damaged my drone, suggestions are needed

    I crashed my p3a into a tree yesterday, and it is totally my fault. After I reboot everything, the motor num2 doesn't work anymore, and a motor obstructed error message popped up. Even though that motor rotates just as fine as others, I was still hoping the motor itself was broken during the...
  2. J

    ESC fault

    Hi all, New to this forum thingy so please forgive me if I don't post this correctly! I've just purchased a second hand Phantom 3 advanced, I've owned several cheaper drones before but thought I'd go to the next level. The P3 came with prop guards which I decided to remove, I replaced the...
  3. D

    E305 motor kit for sale

    selling e305 4 moto kit with esc's Opened esc's plastic to put better thermal pads in, and resealed them. Kit has about 10 hours on it max. power cords are cut short but not by much. Box and packaging included, no props or instructions, but instructions can be downloaded off of dji's website...
  4. T

    Esc problem or Motor?

    Hi everyone, Ive recently just bought a Phantom 3 pro second hand. The thing is awesome and have a good few great flights in my local area. I recently decided to remove the prop guards and stupidly put the longer screw back in which on closer inspection as damaged the motor coil. From what i...
  5. T

    Phantom 2 Vision Plus spare parts.

    Time to move out some of my spare Phantom 2 Vision Plus parts. I will pick up the PayPal and shipping fees to the lower 48 states . ALL PART’s ARE NEW AND NEVER INSTALLED 1) Phantom 2 Vision+ Wifi Range Extender RE700 $50.00 2) Phantom 2 Vision+ esc V2.0 Part # 7 $10.00 3) Phantom 2 Vision...
  6. R

    Dji phantom 3 esc main board error fix

    Hi everyone my dad was an worker at DJI B.v. he knows everything how to fix stuff on the main board, so i put an advertisement on an website. and an person came with an phantom 3 pro with an esc accelerometer error. so he ordered an new main board (part33) it helped very well but i though what...
  7. R

    New Motors and Esc but no lights

    I just replaced my original motors with new 2312 and brand new esc's When Calibrating the GPS the front lights do not come on and the two rear end up flashing 2 green and 1 red. The motors seem to run fine. To scared to try with props on though. The front leds do work as when I flick switch...
  8. D

    Motor or ESC or Motherboard burned out?

    Currently all green lights, ready to fly... just motors "twitch" and wont spin nor takeoff. Background: removed the prop guards and the plastic mounting brackets, then mounted the motors with the same LONG screws... (believe the long screws interfered with magnetic field of motors, and now...
  9. W

    Motor & ESC/Centreboard inspection

    In an unnecessary rush I've made a stupid error and killed my P3A - persistent ESC errors despite all the standard troubleshooting. The story is: after some routine maintenance I used the wrong screws (too long) to mount the motors, I assume the majority of the damage was done when trying to...
  10. S

    Motor malfunctioning after switching another motor

    Alright, so I crashed my DJI phantom 2. One of the motors acted weird so I decided to switch it. After switching both motor and ESC, another motor is now malfunctioning (i.e. not starting at all). Anyone with a good guess at what might have happened? There is power going to the ESC at the...
  11. E

    New P4 with ESC status error... Any hope?

    Talk about being bummed... Ugh. Was getting ready for my maiden flight with my new P4, but I keep getting an ESC status error in the DJI GO app. "ESC status error. Please restart the aircraft. Contact DJI Support if the error persists." I have seen posts about ESC errors in the past because...
  12. F

    A couple of questions regarding motors (not spinning)

    Hi all, I went for a quick flight and soon after take of the (battery) alarm went of, I had this happen to me once before so I was eager to get the bird near the ground as quick as possible, so I descended over a grassy field hoping a potential crash would be softer on the grass. Anyway it...
  13. Eric1084

    First time flying it. Motor Burned Out.

    This is quite interesting. I just received my Phantom 3 Advanced yesterday. And I am taking it for a test run. And after about 10 seconds of flying it in the air, one motor supposedly burned out(And I received "Motor Obstructed") warning. Then it flipped sideway, and tumbled to the ground. It...
  14. R

    Prop Guard Long Screw Motor/ESC Short

    Hi all, long time reader, first time poster, I made the boneheaded move today of putting in the long screws from the prop guards back into the drone. When I went to fire up the drone (to only my surprise) two of the motors did not work and two LEDs would not illuminate. Do I need to replace...
  15. J

    Phantom 3 Adv ESCs & Motors

    Ok, so had prop guards on and flying like normal, but then did a firmware update.... silly me to remove all the the props/accessories for the update and use the long guard screws again... Now... I am getting an esc error and all 4 motors are not working. My question is: Did the guard screws...
  16. S

    Repair assitance

    Totally new to the drone scene. I had a rough landing trying out my phantom 2. Sparks and funny smells emanated from one leg, and now a motor won't turn. I've researched it and I am pretty sure it's either the motor or the ESC. What I don't know is what ESC to order. Everything I see says it's...