broken

Hello all, I'm asking for some help here because I'm losing my mind with frustration at what has happened to my drone. Let me explain. I'm a Phantom 3 Standard owner. I'm also a full time student, so this was a fairly large purchase and something I put a lot of time and research into. I...

The other day I managed to crash my drone into black sand, one motor started spinning very slow and the others were still spinning fast. So I assumed it was just the black sand slowing it down stuck in the motor, so I disassembled the drone and took the motor apart, cleaned all the sand out...

There is an auction for a P3P with a broken camera and a cracked chassis, and yet it's attracting a lot more bids than I thought something that is broken would....I am a little surprised so wondered if anyone wants to share their opinion please, as to why it's still going for, currently, over...

Hello all, I own few dji drones (phantom 3 and 4, inspire, mavic) and I was wondering if anyone cold help me with my phantom 3 standard. I am trying to sell it however it is a real shutdown when I attempt to give the customer a test fly and the gimbal doesn't calibrate properly when turning on...

I recently bought a used phantom 4, and after looking at the video I noticed that there are black verticle stripes running through the video. I did some research and reset all my camera settings and updated the drone, but the problem persisted. I turned over exposure warning off and the problem...

This is my problem. My phantom 4 is broken after losing connection. I send it in for repair. Dji wants $218 for repair service. I ask them why? It's still under warranty! I send my proof of purchase. I bought it last year from B&H for $1550. Dji said: no warranty repair because my...

So awhile back I crashed my Phantom 3 Pro and the gimbal rig essentially exploded. I bought a new rig and replaced it and the camera wouldn't stabilize correctly and was making a pretty terrible sound. So, I bought an entirely new camera/gimbal setup for the pro, and when I hook it up, the...

Hi, Does anyone have a Phantom 4 that no longer works either because it was immersed in water or has hardware issues. I am looking to buy a Phantom 4 shell to use as a prop at trade shows, if you are in the UK and have a broken Phantom 4 which looks okay but does not fly and want to sell it...

Hi Guys, I have a very very very big problem with my Bird. And i hope to get it fixed a soon as possible. I contacted DJI about the issue but they told me to ship it back, no way. I'm going on holiday in a few days, so no time for that. Good, i updated the firmware and suddenly my Phone's...

I got my drone back about 2 weeks ago after a long long long repair process. I also brought a ND filter to be ready when the drone arrived back. When I got the drone I flew it a few times with the normal lens and everything was good and normal. I went to change the lens to the ND filter and as...

Hello everyone, Today i was flying my p4p and I hit a tree with a alltitde of less than 2m and the drone hit the ground on the back, the propereller was all good but the gimbal yaw broken. The gimbal can not turn right or left, sometimes shakes and sometimes doesn't move, I don't know if I...

So my Phantom 4 Pro took a tumble and the gimbal arm seems to have separated from the motor. At least that's what I think. I don't have DJI Care and I'm looking for some advice as to if I'm correct about it being the arm and motor and if it's something I might be able to fix on my own. Here's...

I have seen this question on here but it didn't help me too much. So after crashing the Phantom, the roll arm was bent (see photo) and it is doing things like tilting the camera sideways up and down. It is just bent in that way and just that part (to my knowledge) that is broken. My questions...

My compass wasn't working after a crash so I opened up my phantom only to find the compass connector completely broken off. I tried soldering some wire to it but it seems the metal plates that were one the actual PCB were completely ripped off. Is there any way to solder this back together. Or...

Hi, I crashed my P2 from approximately 60 foot. The battery died towards the end of a flight. It hit so hard it knocked several components off the main board. I started by replacing the main board. However once powered up it just beeps Motor 1 and Motor 2 flash red lights Motor 3 and Motor 4...

Hey everyone. I just bought a brand new Phantom 3 Standard edition. I set it up with the dji go app and evverything seemed to be fine. However, when i tried taking off, it gave me the error of "You are in Atti mode. Please turn on gps to fly" I toggled the s1 switch all the way up and it said...

If anybody out there has a broken p3p gimbal will you PLEASE sell me the little fan??? I don't need the whole Camera, just the fan.. (if it works & works quietly) OR I'll buy the Rx/VPS Fan!? I am desperately looking for a replacement but cannot find one... I did manage to find them from a...

So I was flying my Phantom up a road on a hill and did something stupid, which was to turn a curve around the mountain and the Phantom got disconnected. I wasn't too worried as I'd set it to a return home altitude that was way more than enough, but when I ran around the corner I couldn't find it...

My hardshell backpack case broke my antenna at the base.I thought about super glueing it.... but i don't think it will be able to rotate once glued... anyone have any suggestions? Or Potentially a stock antenna available?

IF you have a broken or damaged gimble or drone and want it fixed or want to get rid of it. I will buy them off you or fix them for you. I have done some seriously tricky repairs in the past fixing boards DJi would throw away. so if you have a broken gimble, even if is completely totaled...