binding

  1. B

    Cannot link p3p to remote

    I bought a second hand dji phantom 3 pro and when i turn the rc on it glows with red light. When i try to link the rc to the drone my phone says "remote controller signal weak" but i can put the rc into link mode. However my p3p just blinks 2 green and does nothing when i press the button on the...
  2. G

    P3S, RC stuck on FW 1.7.90, CANNOT UPDATE, STUCK ON 1.7.90

    Hi guys, I never once had a problem with my P3S up until its recent 1.9.20 update. I updated via wifi and everything seemed to check out ok. After updating I tried to do a flight but I could not get the AC to connect to the remote. Link indicator lights were both red on the AC and the RC. Tried...
  3. K

    Remote keeps connecting and disconnecting (every 5 seconds) to drone after gimbal replacement

    Hi All, I've come across a problem with a standard when I removed the the camera (only the camera and arms, not the base that houses the wifi module etc.). Before removing the camera I as able to fly the drone and had connection to the DJI App throughout flight. I as also able to fly the...
  4. N

    Camera showing disconnected after resetting cache and reinstalling app

    Camera doesn't show up on the DJI GO app, I've tried multiple devices both android and iPhone, I've reinstalled the app, delete cache data, and erased all content and settings from my iPad mini. Only after deleting the app was I able to get the motor running. And the RC Is now green and my...
  5. G

    Bindind old controller to a used P3S

    Ok folks, I need some technical assistance. I crashed my P3S, the gimble was destroyed. My son gave me his old P3S, which is about 3 months old. I watched you tube videos on how to bind, but nothing is working. When I power up the drone, the red lights stay solid and the yellow lights flash...
  6. S

    Phantom 2 binding problems

    I have a phantom 2 with NAZA-M V2 receiver with the 2 antennae. The receiver is the orange version and is d-Bus. I also have a DJI DJ6 controller. I am unable to get them to bind. Is this the correct controller? When I turn on the drone, the little red light in the battery compartment...
  7. LoneStarLori

    How to find the Mac address on a P2V Windows 10

    I recently purchased a 2nd hand P2V and the box that it was in was not the same box it should have been. Different serial numbers on all pieces. Therefore the QR code to bind it to the app did not work. After reaching out to DJI a few times (to no avail) and trying to get across to them the...
  8. B

    Controller to Phantom 2 Bound But Not Controlling

    Been a while........ I have not flown for a little while. I have a Phantom 2 w/2x3 Gimbal, FPV & standard controller. Purchased as a package from B&H about 1 1/2 years ago. All flights have gone well over the period of ownership. About a month ago my computer crashed from a bad hard drive...