2312a

  1. H

    One motor is slow?

    The other day I managed to crash my drone into black sand, one motor started spinning very slow and the others were still spinning fast. So I assumed it was just the black sand slowing it down stuck in the motor, so I disassembled the drone and took the motor apart, cleaned all the sand out...
  2. S

    P3 Pro Needs New ESC Center Board (Which One?)

    [NOTE: I posted this in the P3 "Help" section a few days ago and am now trying here.] I have a P3 Pro which I have flown about 50 times and which worked flawlessly until I crashed it recently. It had never been opened until I cut the decals and dissassembled it today. The crash pushed the...
  3. S

    P3 Pro Needs New ESC Center Board

    I have a P3 Pro which I have flown about 50 times and which worked flawlessly until I crashed it recently. It had never been opened until I cut the decals and dissassembled it today. The crash pushed the flight controller through the center of the board and broke the solder connections. I see...
  4. J

    "Battery error" after replacing motors...

    Hi all, I've only had my phantom 3 for 2 months and I made the fatal mistake I hear a lot of there make. Accidentally putting the long prop guard screws in without the prop guards resulting in ruined motor coils. So I ordered all four of my new motors, made sure they were the exact ones I...
  5. C

    Phantom 3 replacement motors not available on DJI website

    I need to replace my Phantom 3 Advanced's motors (2312A) but DJI's website doesn't sell these replacement motors anymore. I emailed them and they responded saying that they don't sell them anymore and that I should send my drone in to the North American support center to have it fixed. I was...
  6. L

    Disassembly of 2312a and gimbal motors.

    There is sand on all my motors and the gimbal. I haven't found any guidance on how to open and clean the motors. The motors for the props are the newer 2312a and seem to be harder to disassemble.
  7. L

    Interchanging 2312 and 2312a motors on phantom 3?

    I need to replace the 1 motor on my phantom 3, which uses the newer 2312a motors from DJI (Buy 2312A Motor (CCW) | DJI Store), but I have lots of spare motors that use the old 2312 motors from DJI (Buy 2312 Motor (CCW) | DJI Store). On the DJI website they say they aren't interchangeable, but...