Recent content by zmnypit

Re: "Not intelligent battery" issue with a twist. Need sugge Here's a pic of the intelligent battery connector before soldering it back on: http://imgur.com/Pm57e2B[1]

Ok guys I have a p2v+ that was flown a handful of times before crashing into a tree falling to the ground resulting in the battery adapter being broke and the smart connector ripped off the main board. When I power on I get the "not intelligent battery" error which is expected since the...

Re: How to remove video transmitter? Thanks!

I need to solder a new battery connector as mine is broke but it appears I need to remove the WiFi transmitter to reach the point where its soldered to the board. I have taken the one screw out next to the transmitter and it appears to be loose now but there's a little resistance and I don't...

I have the hero 4 black and have not noticed the focus issue the H3+ had.

Scroll down towards the bottom to see the lights: http://www.helipal.com/dji-phantom-gps-drone-rtf.html

I had the same fear after buying my CF props. Come to find out (The hard way) They are tougher than I thought. I have tipped over in dirt when landing forcing them to come to a dead stop and didn't faze them. I also hit a tree last night then crashed to the ground from about 15ft still un fazed...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Yeah I noticed the battery light was still on 2 bars so I guess that's why. I'll look around for some voltages and try again this afternoon.

Copied from another thread: Gain settings won't effect lift, thrust, etc. Here is a brief tutorial on what the Naza gain settings do cut/pasted from this page (warning-Ching-lish): http://wiki.dji.com/en/index.php/Naza-M ... ot_Setting If gain is too large, you will find the multi-rotor...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Thanks guy! Took it for two test flights yesterday in almost perfect conditions with the only add ones being a GoPro hero 4, and Carbon Fiber vibration dampener. I started the camera at take off both times and only managed 14min and...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Was able to completely finish my conversion last night. I now have a working P2 USB port thanks to Dewey's toggle switch method. Having the port in the front is so much easier when using the P2 battery. I mounted the switch in the...

I'm thinking you need to either mess with the gains for the CF props or do an IMU calibration.

Possible gain issues? Still running stock props?

I have the same issue at times. Doesn't appear to happen all the time though. One thing I think could be causing my issue was right after I got it I hit some power lines and crashed landed in the road. Nothing look damaged but I noticed the that one wing/leg seemed to have a slight bend close to...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Yeah I haven't actually adjusted them yet. They are still default at the moment. I'll check them when I get home but those are some I saved from this thread a few weeks ago. Im still running the stock TX so no adjustments there