Recent content by Zeety

CarlJ The 3 wires in a Server cable are held in with little black tabs which you can lift up, and slide out the wires. Once you do that, you can get them through the leg grommet, then put the wired back into the connector (or not).

I've been running into a conundrum and thought I'd ask if anyone knows whats happening here. I've got a fast wobble or shake when hovering. It showed up after installing DYS 3 axis smart gimbal (but I've also had the same effect putting a similar weight it's place) and tall Landing gear to...

Thanks Justgregg for the info. If you are getting oscillation, where it teeters back and forth ( over correcting loop) You might try turning down your Atti Gains 10% at a time. When I switched to Carbon props the stiffness of the props tended to do that if I did any quick maneuvers...

Symptom: with just a push on the vertical stick, the phantom pitches up the back left and down on the front right. I end up rotating a bit as well. Things I've looked into: Swapped props Balanced props Opened up the case to look for weirdness, like cracks, nope seems clear there from my novice...