Recent content by zapf

  1. Z

    Replacement parts for the p3?

    What you saw was the shell; they only have the p1 and p2 available. I did find another vendor that had it listed (but on backorder obviously) so I at least have a place to send me a notification http://www.dronenerds.com/catalogsearch/result/index/?limit=50&q=shell
  2. Z

    Replacement parts for the p3?

    They are selling complete bodys (including motors and electronics) minus the ground sensor and gimbal for $680. I've been talking to a replacement part seller on ebay who says he has them ordered, but they haven't started shipping yet. Another thread was able to find a site with them listed (but...
  3. Z

    Replacement parts for the p3?

    I was able to find a replacement motor on ebay (new as well). Looks like parts are starting to show up; I've contacted him about replacement shells. If you are still interested in parting out the shell barry, I'm interested. send me a message on the email I shared with you.
  4. Z

    Barry, let me know what you want for the plastic body (without the motors or the mainboard). I...

    Barry, let me know what you want for the plastic body (without the motors or the mainboard). I don't even need the landing gear if you'd like to keep those separate, just the main body
  5. Z

    Hey Barry, I'm looking for the frame and one motor (front left, clockwise). Either the lower...

    Hey Barry, I'm looking for the frame and one motor (front left, clockwise). Either the lower half or the whole thing if you don't want to split them (if both, screws as well obviously). Feel free to mail me with an offer, thanks. Zaplocked at gmail dot com
  6. Z

    Replacement parts for the p3?

    I'm going to be looking at someone's p3 today that crashed, and apparently attempted repair on. I have no idea what the condition is, but someone mentioned that mainboard might be intact and it was just wiring / frame damage. Are there replacement parts available? All the p2 stuff was pretty...
  7. Z

    Using Gopro 4

    dronexpert.nl has a solution to swap out (and back and forth quickly if you're really into that) between the vision+ camera and a zenmuse + gopro, presumably based off that work in the rcgroups thread linked below. though after buying it and the requisite accessories and the zenmuse, you might...
  8. Z

    Troubleshooting an h3-3d 1.0 fpv issue

    To begin with, I have 2 phantom 2s. One with a h3-3d 1.0, and one with the h3-3d 1.1. My older one I keep my hero3+ on, the newer one, my hero4. I wanted to fix the 1.0 fpv issue with a hero4 cameras, so I bought a pair of those replacement gopro bus connectors people have been using (not from...
  9. Z

    locking gimbal for transport

    Do you have access to a 3d printer? There is a clip on thingiverse thats more universal (clips to itself instead of the landing gear) http://www.thingiverse.com/thing:406396
  10. Z

    Alu Case Mod to fit all FPV setup

    Pelican should have what you want. I measured the total height of mine (w/ the cheap tall china legs) and chose the 1620 based on the internal dimensions.
  11. Z

    Get rid of the USB ribbon cable!

    I bought 2 from an ebay seller and didn't have a lot of luck - I first tried cutting the 5v trace to see if I could make a version that didn't charge while still pulling video. I wasn't able to get video, so I tried with the second, unmodified connector just to make sure, and that one didn't...
  12. Z

    GoPro Hero 4 fits my H3-3D....

    Its actually possible to make a critical comment about the current state of IP use and innovation in china without resorting to xenophobia, gr8pics, and it would probably result in fewer completely worthless posts in this thread!
  13. Z

    GoPro Hero 4 - New info

    Everything I've read here and on other forums makes me believe that cutting the 5v line from coming into the hero4 (and adding a switch if you wanted to delay it, since that seems to work as well) is the best option. Someone with the goodluckbuy cable should take a look at the best place to do that.