Recent content by wjs2

  1. W

    Two continuous red LEDs - critical error

    Thank you!
  2. W

    Two continuous red LEDs - critical error

    After posting, I saw a different P3 thread with the answer - in the DJI go app, the switch for turn-off LEDs had somehow changed from LEDs off to LEDS on. On the last flight before I noticed the LEDs, DJI Go showed a warning when I pressed RTH in the App. It cleared before I had a chance to...
  3. W

    Two continuous red LEDs - critical error

    My P4 has two continuous red LEDs on. The manual says this is a critical error. After turning the battery on, a few seconds pass until all 4 LEDs are active. The front two remain RED, while the back two go through a sequence of operations until they settle at green on-off flashing. The manual...
  4. W

    Drone detectors, spoofing, jamming

    Incorrect - interfering with radio communications is most certainly a federal offense (FCC part 97 rules)
  5. W

    P4 flyaway

    Sorry for the confusion. The log and reality do not agree. The log says the drone flew over my head and landed behind me - the reality is that the drone flew away out of sight. The log says that after landing at home, it then rose up and flew to a location in a lake and reported landing...
  6. W

    P4 flyaway

    Many thanks for your suggestion. I had previously had two flights that properly RTH at the same home location - all 3 flights left from the place. If it has a ‘bad Home Point’, why would it attempt to use such a bad point? I’m not familiar with how a bad home point comes into existence...
  7. W

    P4 flyaway

    A few questions, but first, the gory details. P4 with latest firmware / DJI-Go / Apple 6. Two routine flights - both ended with the RTH request. From the same location, 3rd flight -drone became unresponsive and flew away. A return to home was sent. The flight log shows the sent request. The...