Difference is that hdmi is a HD video, other input is SD only. Not sure if gimbal cable carries HD.
I have a problem on my air unit: my sbus (dbus) cable is broken, the pins comes out of plastic case.
Please check on your cable how is connected. I'm sure that the brown cable is on right pin...
I'm interested to understand the communication from lb and flight control. I use lb on a cablecam, and I have a cc3d board with my firmware for control. I wish send info from my board to ground by telemetry channel. Best is also change icon and name on ground system but this require a complete...
Dear friend, as you don't have hdmi cables (I have a lot...) I don't have the USB ttl adapter. I ordered one on eBay but I'm still waiting. So, I can't help you but after all take cate to have led Green!
Hi gaucho, on my air unit when I connect hdmi cable and switch on the camera the led from red became green. I don't have a go pro, but a gh4 but I'm sure that there are no difference.
So, your problem is in go pro connection or air unit. But as air unit was working and not repaired, I'm pretty...
A question: from the android app, are you able to set parameters for the LB? Like video connection, channel etc...? Do you receive ok from units?
I think that is important discover what video there is on hdmi.
It can be:
The right video
A black video
No video at all
The strange is that the...
The led is also for HDMI, I'm sure. I just connected a GH4, if I switch off the camera, the led blink red.
So, if you have red led, there is a problema in air unit or cable or gopro.
I understood that you upgrade only ground unit, I'm sorry.
About device address, I agree, maybe is in some not...
mmmhh... If gopro or hdmi cable have problem, you don't see the green light on the air unit.
Air unit may be have problem, I know that some air unit have the same problem od the ground (don't show the firmware component) and don't work.Try to connect in the assistant.
I assume that air and...
About TTL, the adapter I'm waiting for have a jumper to switch from 3.3 to 5 volts.
Now the problem is to be sure if is your tablet the problem, or if something don't work in repaired unit.
My unit work, I tried today.
Have you a TV or monitor with hdmi in? Many times, a PC monitor with a digital input DVI and adapter is working.
The cable is a mini-HDMI to HDMI, or by adaper. I have all here, but my unit is working (just arrived back).
Later I will test and try to connect my phone and my tablet.
I assume that...
So, now the offset 0x4a0000 is working, after update? The best way is to do all the procedure and at the end update all, to be sure, I'm right?
Gaucho, you can open a a DJI repair center now....
Strange combination, I received today my ex-fault LB unit. DJI sent me a NEW ground unit (I'm sure that is new because is in the box dedicated to the ground units alone), no repair. Tomorrow I test it, but now I know that if something happen there is the solution.
GREAT JOB!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.