Recent content by Whilash73

I'll probably just hit record and fly around for now. Probably be using it mostly on my Camaro for cruises and such. Thanks for the warning though. I'll keep it mind.

I certainly will. Looking for a decent used gopro to attach to it.

The Naza LED was bad. Got all my colors. Not to figure out how to fly it. ;) Thanks for the help guys. Happy Flying!

Got her airborne, but in the house. Haven't gotten a new led yet, but it works. Drifted quite a bit, but that could be due to lack of gps satellites, and no calibration. Been raining here alot, so I cant even get my grass cut.

I'm having a similar issue...green lights only. I ordered a new led module. I don't get ANY colors but green. I've checked everything. My compass readings in assistant are out of spec a bit a bit (700+ in MOD reading), but it doesn't give me a self check status. I bought mine used, but learned a...

Hoked it up to the Assistant again last night. The compass seems to be working, but off according to the recommended numbers. Gonna do the magnet trick and see if I can get it within spec. I guess I could try and calibrate the compass without without the red and yellow leds.

Is that all the GPS (puck) antenna costs?

I saw that trick in another video, but I think my main problem is not being able to see yellow and red leds, so I know when to calibrate, or if there are other errors. I ordered a new led module, and a compass (just to be safe). Hoping it's not the GPS antenna, or the MC. High dollar items that...

Under "upgrade" I a hardware I.D., and firmware 6.0.1.3 I'm wondering if the LED board might be bad. Read a couple of posts about that. That would explain why I only get green flashes on the front. Going to check the GPS antenna and make sure it's not damaged too.

I just bought a used P1. When I power it up, It flashes green 4x, then green every second, like it has satellite lock, BUT it never flashes red, green, yellow on power up. It never asks for a Compass calibration either. It just keeps blinking green. I've updated the firmware, transmitter...