Recent content by vgo195

You can install android apk files (at least on P4P+ v1) but the problem is that there is not enough power to run them. Also the androind version is old so the apps don't work as supposed. I installed recently Map Pilot Pro for android but it didn't work well.

Hi, the GL300E now can have 3rd party apps. The problem is that it is very old android version (<7) and most apps don't work properly.

Thanks, I ended up with ipad mini 5.

No there is no ND filter. Just the original clear filter. With double grid missions the problem is reduced but it shouldn't occur even on single grid missions with 80/80 overlap. Did some tests with camera settings and the best quality based on Metashape estimation is with f4-5.6. I always use...

Hi, I got a used P4Pro v1 after crashing my P4 advanced. With P4 Adv I was very happy with the mapping results. I always use 5+ GCP's and the alignment with Metashape was always within 2-3 cm on 40-60m altitude missions. With the new (used) drone P4Pro most projects have problems with the gcp's...

Thanks for the replies. I ended up ordering a ipad mini 5. I found it on sale for 400$ and I think it is the most safe option. I hope it will last for 2-3 years of mapping..!

My android phone has usb-c and connects fine to the rc but I need to work with iOS in order to use Map Pilot Pro. Maybe the iPad Air can't keep up also? What cpu does it have? Maybe try to re-link the Rc with the P4P to see if it helps?

Hey guys, I follow this thread because I am to buy a new ipad mini. Right now I am on ipad mini 4 which seems insufficient to handle latest DJI Go 4 and especially Map Pilot Pro which I use for my mapping missions. I bought a USB-C to USB-A adapter (not the syntech) and tried to a friend's ipad...

Hi there, looking for upgrading my mini 4 to mini 6. Does the solution provided with the adapter work good? Is it stable? I use P4P v1 for mapping and I need it to be stable.

Hi, I ended up repairing the drone. The problem was not the gps module but the flight controller. They replaced it and it seems ok for now. I hope the drone to work for some time because it was not a cheap repair, it costed about 300$ !

I guess Meta4 was right. I did some tests and the "GPS disconnected" error happened also on the original battery the drone came with. However on one of the 3 batteries the issue is more frequent. Anyway I must send the drone for repair. I contacted some repair shop and they told me that the GPS...

Of course the batteries should not affect the GPS reception but maybe something has to do with the power board? It seems that the GPS is disconnected internally. I will do some more tests and see. So you suggest not to refresh the firmware? Do I have something to loose by doing it?

Thanks guys, I will try to refresh the firmware with one of the bad batteries and check the results.

Hi, I am having some problems lately with my P4A. The problem occurs while in flight it looses the gps signals and switches to ATTI mode. DJI Go reports "GPS disconnected" and other GPS related warnings. I did some tests and noticed that the problem does not occur with the original high capacity...

Hi there, the problem remains. I have downloaded 2 flight logs from the phantom. Can anyone check them and tell me what's going on? Is there a GPS problem or something else? Thanks in advance. https://1drv.ms/u/s!AhMccxkd2vuMrzXrFEuk_Jirm8vB?e=NWRGZa...