Recent content by tsoban

Hi ilovecoffe, I cannot find your famous unofficial apk for dji vision 2+ anylonger under download link; could you share the file? Thanks tsoban

I did following test: 1. EC mode indicated in Software and Hardware (knob position), RC range approx 500-600m (2 flights); 2. I switched to FCC in software (no hardware), RC range 800-840m (3 flights); 3. Switched to FCC also in hardware, RC range >1100m (over 3 flights max not yet determined)...

I was already using 640 at 15fps, going down to 320 starts to be non-practical, other strange think is that now we have only +1C here in Finland, and the FPV working time is not longer than indoors (+22C), I would expect that if heat distribution is a problem 21C difference in ambient...

Re: 1st Few Flights with DBSMODs as well I agree the new sound is awesome! But it might be mainly due to new propellers: I have impression that new ones (high thrust) have higher pitch and therefore the RMPs are lower at the same thrust, which gives this nice more bass sound.

I just received v3 on Friday, did all necessary updates, calibrations and went for first flight. After a few minutes FPV was frozen while telemetry was still smoothly updated. I reminds me known issue with overheated WiFi module in PV+, but I was thinking that DJI solved this issue already some...

Re: Has anyone tried the FPV booster app?? It is really strange that you didn't noticed any boost with this app, I remember that many PhantomPilots forum members were testing this app during Beta stage and everybody (in case for PV+ booster app) reported range gain. In contrary to PV where as...

With thw newest vision app yes, but my firmware is still not upgraded to 3.08.

Depending on your setup you will see 10-30% range gain. But for me more important than range is quality of the video link (video is smoother and will break only at the end of range). I am using it all the time. Cheers

LG G Pad. 8.3 works also fine. I am using amazon basic universlal holder, it has the same size and thread as DJI phone holder. But 8.3 inch is a bit to big for smooth integration with RC. So I am using it mainly for GS flight programming and supervision.

Re: FPV Booster for Vision (non-Plus) Beta Testing What you mean by 'may behave differently and randomly'. Does it mean that some algorithm's variables are randomly assigned after power cycle? I have to say that I never experienced strange behaviour which I couldn't explain by an external...

Re: FPV Booster for Vision (non-Plus) Beta Testing To streamline the tests, avoid inconsistency between testers and need to repeat them (like it happen to Geert) can we agree common testing protocol ( in addition to recommendations from PVFlyer from first post) I would suggest following steps...

Re: FPV Booster for Vision (non-Plus) Beta Testing Latest results: Unmodified RE500, fpv 640@30fps, attitude 75m (rest conditions as in previous tests) un-boosted: smooth FPV until 220m, signal lost at 295m; boosted: smooth FPV until 265m, signal lost at 320m; Unmodified RE500, fpv...

Re: FPV Booster for Vision (non-Plus) Beta Testing I did a few more tests today, settings as previously: fvp 640@15fps (I didn't see your post before flying) and basically results confirms my previous observations: medium-high interference, flying attitude 100m, without booster fpv started to...

Re: FPV Booster for Vision (non-Plus) Beta Testing Finally wether was better so I managed to test b#02. Two tests have been performed. At 50 and 80m attitude, fvp 640 15fps, all bateries fully charged. Urban area with medium level of wifi saturation (Helsinki western harbor), moderate wind...

Re: FPV Booster for Vision (non-plus) Beta Testing Boosting procedure works well now, hopefully tommorow i will manage to fly and test the range.