Recent content by TrynFlyn

  1. T

    P3 Firmware Firmware p3p

    1.5.7 is FW for the TX not the aircraft. I have never seen a post related to issues with the TX firmware. If you mean FW 1.5.3 for the AC. It is not recommended to use 1.5.3 due to battery voltage issues.
  2. T

    FAA Control Tower Phone numbers

    Try here: ATCT Commercial Phone Numbers
  3. T

    1.4.10+ FW

    This has been reported by some owners with all of the recent updates. 1.4.1 showing as 1.3.2+. 1.5.3 showing as 1.4.10+ and 1.6.4 showing as 1.5.3+. I would try to verify the actual installed version. It's not recommended to fly with 1.5.3. If it's a new P3A, it may or may not have a log file...
  4. T

    Refused clearance by an airport???

    Different results by different people at the same airport are likely; A) Because of the pilots perception of what the ATCT meant when they say they don't "approve" flights within 5 miles. B) The flight was denied for a legitimate reason, such as manned aircraft operations in the proposed flight...
  5. T

    I think I'm about to give up...

    It is challenging finding places to fly around here also. There is a city ordinance against model aircraft in city parks, the county also has one for county parks and the state also has one for all state parks. It's important to understand what a airport control tower may be saying when you...
  6. T

    Need help on 1.6.40 update. Craft dies when reducing throttle for landing

    There is nothing wrong with your Phantom. That's how it works. When on the ground, pulling back on the elevator for 3 seconds will stop the motors. You can find a lot of useful information in the manual. It's a recommended read :)
  7. T

    FCC ID SS3-WM3221510 - W322B - New revision of P3A?

    1.4.1 is fine as well as 1.6.4. There is a issue in 1.5.3 relating to battery voltage measurements. If you can verify the FW version by looking in the log file on the SD card, that would be best. As I mentioned, I believe the + indicates the next version. I recommend the latest, and have had no...
  8. T

    FCC ID SS3-WM3221510 - W322B - New revision of P3A?

    The 1.2 miles was just a specification that DJI put out, most all P3's got much better actual range. You may want to check the log file on the SD card for the AC FW version. I believe 1.4.1+ (displayed in the GO app) is actually 1.5.3, which most recommend not to fly with.
  9. T

    Watch a friendly piece of advice chase off a new member

    I don't recall ever seeing this kind of mob mentality in this forum before....not cool.
  10. T

    Got My P3A!! Should I update firmware?

    No need to rush to update the FW. There are no issues with 1.4.1. A battery FW update in 1.6.4 related to cold weather. Fly what you have, take some time and research the pros and cons of updating. IMO - the GEO thing is not a big deal. Most of us tend to fly by the rules anyway, there are...
  11. T

    IMPORTANT: DJI Go app 2.50/2.51 enables GEO functionality

    Scroll down and click "show more" only goes back to 2.4.2
  12. T

    Another Newbie with Questions

    Format your SD card to exFAT on your computer or, if you format it in the Phantom, it will do it in exFAT automatically. I use the 16GB card that came with the P3 for firmware. The battery will update when you update the FW on the bird with FW version 1.3.2 (if your bird is on FW earlier than...
  13. T

    Need Two Screws

    Opps...forgot the word "regular" before Loctite blue. Thanks for the correction and correct plastic Loctite
  14. T

    FAA heliports

    You are correct, the FAA only requires notification not permission. You do not need to provide your registration number to anyone. Only some areas do require permission, "Model aircraft must not operate in Prohibited Areas, Special Flight Rule Areas or, the Washington National Capital Region...