Recent content by tribar

The drone & remote controller need matching firmwares. In other words: When you down- or upgrade the firmware of the remote controller, you most likely also have to down- or upgrade the firmware of the drone. Download the Release Notes to read/learn about them...

First of al, you never mentioned the versions you use of: -The DJI GO app -The Firmware of the drone and remote controller and don't say "the latest", that doen't mean anything ! When the LED on the remote controller is a solid green, the aircraft and remote controller are linked together. You...

That's incorrect. Only 2 on opposite corners have security pins installed. All 4 corners have a rubber damper installed. "Having all 4 in place will create the vibration, or wobble, you speak of" Also incorrect, ALL phantoms (3 & 4 series) came with 4 dampers installed.

That's a gimbal issue (wobble). -Check the 4 white damping rubbers. -Check if the 3 axis of the gimbal rotate freely, without any friction (use a camera lens air blower to clean). -Calibrate the gimbal.

VOLTCRAFT DSO-2154

DJI GO 4 does NOT work with the Phantom 3 series drones !

Photo Caching only works on iOS devices. It does NOT work when using Interval Capture Mode, during Waypoint, Pano and Track sessions.

Litchi works with the P3A, https://flylitchi.com/ But first try reinstalling DJI GO. If the DJI GO app does not work, most likely Litchi also will not work. When after reinstalling DJI GO, you still have problems, the issue is most likely NOT DJI GO but something else. You will have to...

The AC status lights are explained in the User Manual, page 12. The onsreen message tells you to move the AC or calibrate the compass. You didn't write you've done so. Acoording to the release notes you have to restart both the AC & RC after a firmware update. Otherwise video downlink may be...

Try JPG only (NO RAW)

4 white bumbers, 1 on each corner. Their function is to damp vibrations. 2 pegs (locking/cotter pins), on diagonal corners. Their function is to prevent the camera falling off, in case of a mild crash for example.

No. Replacing the 4 white bumbers probably will, they must be at least 8 years old by now.

Make sure you Force Close All other apps before running DJI GO. A faulty and/or unsupported microSD card inserted in the drone can cause your problem, take it out and try again. You have to download the DJI GO app from the official DJI downloads page, NOT from the google play store ...

What are you talking about? Apparently you have NO clue at all.

There's no need for a microSD card in the Crystal Sky. The original footage from the camea is stored on a microSD card in the drone. Supported SD Cards: Write speed ≥15MB/s, Class 10 or UHS-1 rating required https://www.dji.com/nl/phantom-4-pro/info You can find more information about the...