Recent content by Trench

Hi all I'm having an issue I hope someone can help with. I have an S900/A2 with a Taranis x9d plus. The "problem" is that on the A2 I don't get a solid green led. It's a solid red. All the functions ie sticks, switches, knobs work but for some reason I can't get a green led on the A2. The...

Crystal Lake here :)

Hello all :) My Phantom has started acting "strangely". If I'm around 10' and below my Phantom starts going into "landing mode" or losing altitude. I think if it gets below a certain height it will try to land? Maybe? GPS mode, atleast 9 sats But I get nervous trying to hand land it having...

Oh I thought that after self test it should go to straight forward. I have it set to upgrade and it doesn't drift or go to an angle on its own. I thought it should go to straight forward after self test. So I'm all good. Thanks to all of you :)

I did try that and it did not work. After self test it still goes back to about a 30-40 degree downward angle. If you know anything else I'm open, but like I said its not a huge issue. Just want it to operate correctly, thanks again

Coolness, your info helped with the main issue so I'll try this and let you know. Thanks again :)

I did set those sliders to those settings, recalibrated the transmitter and all is GOOD now. I did have to recalibrate a couple times and power cycle but the motion is fine with no stuttering. The only thing that still exists is that after the gimbal self test it still doesn't return to straight...

I have already done that. I'm using the most current rc s/w and phantom s/w. I've calibrated all sticks and dial in both the s/w and selected the upgrade version in the transmitter section. I put that in my initial post, not trying to be rude just an fyi :)

Hi All My first post here, I just recently got my Hero 4 Black and installed my gimbal(P2v3 wH4-3D). When powering on the gimbal does the self test then instead of going to pointing straight forward/outward it points at about a 30-40 degree angle. Not really a problem as I can adjust it to...