Recent content by TheCif

  1. T

    Black screen vision 2

    i think cause of wrong design the wifi chip goes bad in this type (to much heat, not eligible vent) i think this cause i have the same problem but if i use it in very cold conditions than the fpv works.
  2. T

    P2V suddenly starts to plump

    I changed the altitude gain settings from 140% to 200% and since then i didn't notice the problem. (flew 7 times since) The only differences (aside the gain settings) the flight when occurs and when not was that the temperature was much lower now.
  3. T

    P2V losing lift mid flight consistently

    Hi it looks similar than my problem: P2V suddenly starts to plump | DJI Phantom Forum I don't have the solution yet.
  4. T

    P2V suddenly starts to plump

    So, guys! I changed the mainboard and the main controller also, but the problem is still exist. :( I think my next try will be the change of the ESC-s, cause those the only parts which can be involved.
  5. T

    No FPV on Phantom Vision 2

    As i see this is the problem of the wifi module of the camera, which is inside the camera and you can't buy it separately, but the whole camera is so expensive that don't worth to buy it. :(
  6. T

    How do you change a wifi board?

    I've made a full photo montage about the layers of the camera.
  7. T

    P2V suddenly starts to plump

    i made a thermal video about my phantom, but nothing suspicious:
  8. T

    P2V suddenly starts to plump

    I tried to remove my china gimbal (unsoldered from the power, but left it in the copter) and raised the vertical gain a bit but didn't helped.
  9. T

    Phantom 2 loses altitude fast and suddenly

    Hi Trance! It sounds like my problem: http://www.phantompilots.com/threads/p2v-suddenly-starts-to-plump.44115/ No autolanding, no battery fault, but i don't have a solution yet.
  10. T

    Camera not powering on

    Thanks a lot, J Dot!
  11. T

    Camera not powering on

    Hi J Dot! My mainboard looks like what you've linked (see my picture). Sometimes i have fpv sometimes not but the recording is ok. You said should be change the MC, but the MC isn't it the black boxy thing? Thanks in advance!
  12. T

    P2V suddenly starts to plump

    So, i tested it with an another almost new (7 times charged) original battery and it did the same thing. So that is no battery fault. Look at the video from 11:25 it is plumped and i can't do nothing to avoid the crash.
  13. T

    P2V suddenly starts to plump

    Hi, so i flew at the weekend with the same battery and i experienced that, the battery icon at the screen sometimes go red but the percentage didn't dropped ( i had video stream problem, so it's maybe related to that one). The phantoms led never goes red and the battery drained lineary but the...
  14. T

    P2V suddenly starts to plump

    I will try to observe the color of the leds. This is my battery. (see the attached file), maybe it's not genuine, because it's 5400mah not 5200mah.
  15. T

    P2V suddenly starts to plump

    Hi Intruder! Yeah, i know the guys videos and i like it also, see many of them. So, your descending it looks really the same like mine, so i will test with my buddy's battery. Thanks for your effort to uploading the video! Only difference can be between the two plump, that your bird didn't even...