Recent content by tevek

You can buy the FPVLR kit on eBay and depending on where you live have a third party install it for you. I have a boosted setup on mine done a few years ago and it works well. With the advent of occusync etc, the mods became redundant as people were getting the same range straight out of the box...

You could always try something like Plastaid which is sold by spa and swimming pool suppliers. Seems to get a good report from many people on here. Maybe use a dremel to slightly V out the crack and apply the goop. Removing your phantom wetsuit is going to be messy as the adhesive used on the...

Yep that’s him. Given the nearest any sort of authority is 30klms away, I dial mine up and just send it!

If you open up the app, top right hand corner, hit the three dots. From the drop down menu select the top icon. You can set whatever distance up to 500 metres (make sure everything is powered up when you do this to save this option). The 120m is generally the max height to fly under most local...

If you are not seeing any lag when flying on your iPad, I suspect that it will be your hdmi cable not being up to the task of transmitting data and video ‘quick’ enough. I bought a high end cable for mine to reduce any possible lag issues (double the price of a standard cable). As for the limp...

If you have dominator v3 goggles, there is a fan at the top of the goggles activated by a small black button on the top right to stop them fogging up. As for the fit, can’t do much except for additional foam pieces that fit around the eye contact area for a more snug fit.

Yeah you will still need your iPad to use the home screen for settings, ensuring you have your RTH set etc.

All good, can’t remember the sequence if any but it will flag once everything is powered up. As for those ribbons, if they aren’t seated and clicked into place, the cover replaced and the screws seated, you will get weird stuff going on. If you can manage an iPod, you’ll smoke it.

It’s been a couple of years but from memory I powered everything up including my mobile device and waited for the FW update to pop up on the top of the app when in the ‘ready to fly’ screen. Open that up, and away you go. You need to update to enable the simultaneous screens to function. A word...

Hi, yes you can. I’ve used my Dominator v3 goggles using the hdmi module. Once you’ve installed the module you will be prompted to update the controller to give you the dual screen/goggle output. Make sure you get a quality lead.

Well for what it’s worth Ian, I bought the orca wetsuit some time ago and the battery seal was worth the admission price. I’ve been caught out a few times returning from a flight by light showers and the concern was with the battery compartment. Not a drop despite the whole quad being drenched...

Y You sir are a legend!

Tried a different USB cable as you have already changed devices? Have you fitted the hdmi port to the controller. If so, you need to upgrade to 1.9.3 to get both goggles and device to work together. Another thing may be moving to a custom channel and dropping your transmission rate to 4 mbps. It...

I’m normally pretty good with being organised, but this particular time I had to help the wife get ready for work, take the rubbish out and feed the chooks. Just ran out the door with the backpack sans batteries.

Apart from some minor cell deviations, looks like a normal flight.