I try to perform detailed searched before answering questions but sadly the search engine constantly tells me that words are omitted from my search because they are common, like battery, props, best, etc...
How can we search if we can't put in our search terms? I can't really narrow these down...
I own this gimbal and can't get it to work :( Do you know the exact firmware version you are using? I can flash it but i get crazy results every time i load it up.
great redesign to the layout! How is your battery life with it mounted including the camera and case?
ps : why did you have to...
I hooked it up - it's using Brushless Gimbal Code at google - seems to allow me to change the angle settings - it may not have enough strength to balance the camera pointing straight down , but it's close...
Got it stabilized a bit more and I'll be shooting some stuff tonight so I will post an...
Hey Gimbal people,
I have a new gimbal now working from TeamRebelDesign - the Beholder Lite - it's fantastic and very light! I did a test flight with everything wired up neatly last night.
i wired the pitch control to the F2 port on the Naza, and I get control of pitch using X1 (the top screw...
Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev
so 046 is a bust :(
I have the orientation matching the photos in the first post in this thread - it's vibrating... still mostly loose but vibrating..
not leveling though - only due to balance which i tried to get perfect..
how...
Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev
i will try and report back as soon as i can - if i wanted to run that same version you were - which is sorta of how it behaved out of the box - where would i get the firmware? I can't find it?
Cheers! thanks you guys - saving my...
Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev
just tried changing the position of the sensor a few different ways - but same result as in my video with the 048 firmware flash - that rigid behaviour where it has hard stops - goes loose if i flash the eeprom empty or unplug power -...
Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev
hi - ok i will try this - i have some info from the seller:
they sent me the following link and told me to try the instructions therein -
http://www.goodluckbuy.com/images/detai ... %2098390(3).pdf
they say they use the russian...
Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev
guys - i just want this thing to WORK.
i dont understand the ethical ins and outs but if you are implying the software that might make it work is pirated... i woud like to prove it and then demand a refund so i can get a working...
is it possible that my gyro is not working?
Ive checked all the wires and they are all good contacts... 4 wires from the gyro back to the board... gyro is in the right orientation...
that graph never moves - so if the unit never thinks its moving... how can it try to correct - no idea how to...
I got the code from here : https://code.google.com/p/brushless-gim ... loads/list
and i used the arduino tool to first erase the eeprom and then write the most recent version to the board.
I can get it powered, but the motors seem to want to lock it (gently) to one spot - it will rotate 45...
ok guys - i'm getting perhaps closer - but worried that something is wrong with the gear now
I have the firmware loading - and in the gui when i click to start monitoring - i get 0's for pitch and roll...
should the IMU be feeding back more data than this? I can't start to tweak values if...
I am REALLY hoping you can help me then!
I can't get this thing working right - like most folks it 'kinda' worked out of the box once i discovered what you told me about power. i just made up a cable to give it 12 v from a battery. This brought it to life - without the cam on there it was...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.