Recent content by TedroC

  1. T

    Phantom 3 controller went dead during update, help!

    I have bricked two controllers trying to update the firmware through the GO app. Nevermore! My new (3rd) controller won't update using USB (the old way) either. The only solution was to buy a new controller. Nobody I've contacted about this seems to know what the problem is. My only suggestion...
  2. T

    White lights on RC

    BTW, the new rc has v1.6 on it which solved my video reception problem (which is why I was trying to downgrade the software in the first place).
  3. T

    White lights on RC

    Nothing on the sd card. I figured the thing plain 'ole crapped out. A white light on the left of the rc is not even a valid error indicator. I bought a 300c online and it works flawlessly. Thanks again for trying to help.
  4. T

    Remote video trouble

    Some folks are having this issue after updating rc firmware to v1.8 from v1.6. Maybe your friend's rc is running v1.6 and your rc is on v1.8. You could try rolling back the firmware on your rc back to 1.6 through the GO app if this is the case.
  5. T

    White lights on RC

    I do appreciate the help msinger.
  6. T

    White lights on RC

    Ugg Same response
  7. T

    White lights on RC

    When i push the power button twice to turn it on, the lights light up. There is no tone (the RC is silent) The first light that is red when the controller is not connected and green when connected to the drone and blue when updating software, is white.
  8. T

    White lights on RC

    Just tried it and the RC didn't respond at all.
  9. T

    White lights on RC

    Updated firmware on my RC to 1.8 which messed up the video reception. I attempted to downgrade the firmware to 1.6 via the Go app. Got an "update failed" message and 5 white loghts on yhe RC. I tried to reset the RC using the four button procedure which didnt work. Every attempt to make the...
  10. T

    Best App for recurring way points

    You could also use the Waypoint function in the Go app. You'd have to fly the mission to enter the waypoints though.
  11. T

    P3A fan noise

    Sry. Wrong thread.
  12. T

    P3A fan noise

    Turn off the "over exposure warning" in the exposure settings. You won't see the strupes any more.
  13. T

    Who's had success backing off the screws and using zip ties around the arms?

    I had a crash that cracked one of the arms and two of the screws were lost. I bent the thing back in to place and put 3 zip ties on it to hold it. Placed another one zip tie on the remaining 3 arms. It flies great (I have 200+ flights and around 24 hours flight time) NO NEW CRACKS (except for...
  14. T

    Anyone spent quality time with DJI carbon reinforced props?

    I've had mine a few months and really can't tell the difference from the stock white ones. They look better though....
  15. T

    P2V+ 9450 propellors on P3A ???

    DO NOT use metal hubs on the P3 period. ONLY use the composite hubs.