Recent content by stujol

I just purchased a barely used P3P with a great case, extra battery, the extra props it came with and all accessories it shipped with for $600.00 from craigslist. there is a few on ebay going for around that price also. This is my second P3P, if this is your first drone that is the way I...

I tried landing on a steel boat and my p3p went into manual mode due to strong magnetic interference, Then the wind was pushing it around and causing erratic flight. It also ended up fully submerged. I dried it out for 2 days using lots of canned air and all was good. You could use a hair...

there are just a lot of things to remember when flying one and sometimes you have to remember the hard way. They seem to be amazing tough, mine has taken a 50 foot tumble thru a tree and full immersion in a river. So far a little soldering and a gimble cable are all the repairs it has needed...

Got this off dji forum Turn on Controller while connected to Tablet. Start (or restart) the tablet. Click on OK when the USB request comes up. Wait for BLUE "Enter Device" tab shows up. (Should be immediate as the app starts). Turn on copter.

Well it has been a while since I had to play with one to get it to work, go into your app manager and make sure the dji app has all its permissions, It seems like there was a usb setting also. I have a tab e that att threw in with a phone purchase, I will give that a try tonite.

My tab s works great, I have also used some other cheap tablets that worked perfectly fine that were not on the list. It is probably a setting on the tablet.

20170829_180440[1] by stujol posted Aug 30, 2017 at 8:55 AMAfter a unfortunate incident involving a steel boat, a little wind, a vhf antenna and a exit from gps mode because of the steel boat my p3p fell into the water. Fortunately it was in only 5 feet of water so I recovered it quickly and...

water bottle pontoons

Ok I officially have to declare myself a idiot, I did do a double tap but more like clicking a mouse (cuz that is what I do) it was the double press that was the issue. Now to get the camera working agin.

ok I let my p3p sit in heated storage for year, Dry, in a case. I finally get it out charge the batteries, which give the four lights when the button is pressed and nothing, neither the controller of drone will start. It wasn't very old when I put it in storage, maybe 50 flights with three...

Once you have one upgrades don't register on the wife's radar as long as it is still white lol.

watching this thread also

I use RTH all the time with Litchi, I do normally use the button on the controller tho and have not tried with lost signal. I won't be able to test it today but will by Saturday. Make sure you get more than 20 meters away from home point before you shut off controller or it will just land.

If you were using litchi to calibrate, it doesn't tell you to do the turns but the lights will flash. Just do the normal calibration dance and you will be good to go. I don't calibrate my self unless I travel more than 50 miles from my last calibration.

yes a higher resolution camera and dual controls so 1 person can fly while the other runs the camera. Also more battery would be awesome.