Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Hi,
Here is the link to that battery door you are interested in. I have bought from this company a couple times in the past and found them to very professional and relatively fast regarding delivery...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Thanks Dewey.
Yeah, they are about $100.00 Canadian less then the DJI motors. I'm glad you mentioned about the bullet connectors. That's something I would not have considered. I will definitely be snipping those off and hard...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Thanks MC and Dewey. The T motors are considerably less expensive then the DJI motors. That may play a factor in my selection. Do the 20 amp esc's of the T motors make any difference compared to the 15 amp esc's of the DJI motors...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Thanks...which between the two motors and esc's, based on their perspective specs, do you think will be more efficient? I would have to use external LED's with either set up. Bought these from ebay for that very purpose...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Hi,
Just wondering what your opinion is on these motors: http://www.rctigermotor.com/html/2014/C ... 0/279.html
vs the DJI E300 Tuned Propulsion System: http://www.dji.com/product/tuned-propulsion-system
Specs for each motor are...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Darn, that would have been a nice easy fix. Thanks for the pics. Im slowly ordering all the items on that list. I hope to start this project in late December or early January.
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Oh, I forgot to mention I think I will be swapping my motors and esc's for the E300 motors/esc's. I know that if I do that the LED's in the arms will need to be replaced. PJA suggested these LED's from ebay...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Hey Dewey,
Instead of soldering a XT60 to the rear of the DJI Internal Power Connecter will this connecter work?
http://www.ebay.ca/itm/281397364504?ssP ... 1436.l2649
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Hi,
I guess I'm missing it but I was wondering what are the benefits/advantages to upgrading to the P2 motherboard as apposed to keeping the upgraded P1 motherboard?
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Quick request. For those who have upgraded to the E300 kit do you have a link to where you purchased the replacement navigational LED's? I'm sure there is a link in this 109 page thread somewhere I just cant find it. :)
Thanks
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Thanks Dewey. E300's it is. If I can get away with just replacing my P1 motors with the E300's without replacing the esc's that would be an easy and very inexpensive upgrade. But, and correct me if Im wrong, that's not possible. I...
Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy
Dewey, one last question. If you had to pick between the Tiger Anti-Gravity Motors (http://www.rctigermotor.com/html/2013/A ... 16/76.html) and the E300 Propulsion System for a motor upgrade, which one would you pick?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.