Recent content by steveleavitt7777

Has anyone used this yet? Will it work? What apps do I need?

Well I took it apart again and check all connections and the gps antenna. Didn't find anything but put it back together and flew it. It acted the same at first and all the sudden started acting correctly. I have no idea why. Will fly it further and higher this afternoon.

Romans 12:15-16 Rejoice with those who rejoice; mourn with those who mourn. Live in harmony with one another. Do not be proud, but be willing to associate with people of low position. Do not be conceited.

Well I took it apart again and check all connections and the gps antenna. Didn't find anything but put it back together and flew it. It acted the same at first and all the sudden started acting correctly. I have no idea why. Will fly it further and higher this afternoon.

I have done multiple IMU calibrations and compass calibration's I'm getting good GPS. It's like it's in manual mode. No hold at all. Just goes where it want if I don't control. I have no idea why. I have my S1 switch all the way up. Any help?

I did already check Imu stats and calibration numbers and they all checked out correct. It must be hardware. I have sort of thought that all along but I've never heard about the sensor in the naza. I will try that next thank you so much. Any other ideas?

It doesn't try to fly away. It just gets blow around by wind as though it's not trying to hold at all

Yes. I have 3 or 4 times. Made sure it was level. On a wooden table etc.

I have made sure they are both up and have good sat lock. 8 or more. It's not just drifting. It is as though there is no GPS lock at all. I checked the pic vision assistant and it is in phantom mode. I don't know where to check the software to make sure S1 is engaged but the switch is all the...

I am getting sat lock and gps mode on my iPhone app. I will hook it up again and make sure the s1 switch setting. Will let you know.

If I understand correctly naza is the way it comes from the factory. I have not changed it into any other mode other than the way it comes. But yes it acts like there's no Position hold at all

Hey guys I did a couple of imu calibrations and used a level prop to prop on a wooden table in doors. I can do it again but it's not just "drifting". It's like it has no hold at all. Is there a setting that turns positioning off.

So I have had my P2V for a while. Stock camera pitch gimbal had never been connected. I had aftermarket gimbal on it. I repaired it and hooked everything back up like from factory. IMU advanced calibration, compass calibration, updated all stuff and it now won't hold position at all. 9...

I have a phantom 2 vision and Blade QX3 350 I would like to trade for a Phantom 3. The Blade is in excellent shape with gimbal and camera. The phantom is well used but in good condition only it needs someone who is more knowledgeable than I to tweek it. it looses connection sometimes and need...

The blade gimbal is a GB 200. Can I use it on my phantom 2 vision? Anyone know how I would wire it?