Recent content by SlackerATX

The video was good but the stabalization software in premiere is very good. When you speed up video every little movement is seen. You can also level the horizon and do lens correction. Everything you do you lose some video so you end up cropping up to 10% of the video but on average 3% or so...

I have a Taco Supreme Gimbal and edited in Adobe Premiere Pro CC Enjoy! http://youtu.be/oAn1kfH1vno

That's twice I read that people have jumped through hoops to figure out their 4 pin jack is connected. Has something changed to make it difficult to connect? Should I update OP?

http://www.droneslinger.com/software.html Here's the old apps. I don't know if this will fix the problem.

Here's some more sample video. I'm happy with it. Some jello, but I'm not sure how god I was expecting. I supposed I could post-process the rest out. https://www.youtube.com/watch?v=i8FOYN0B2tI BTW, this is just ripped directly off the SD card. No post-processing whatsoever.

How balanced the gimbal is...wind speed...aggressive flying. In general what % of the time the gimbal sits outside it's natural position and the force required to maintain that position. (Not to mention the obvious power and PID setting that will directly impact battery consumption)

I'd try tightening down all the screws. Even a little looseness seemed to make quite a bit of difference to me. Good luck!

I managed to solder rig the IMU cable. Heres a sample I took yesterday. http://youtu.be/j9lQl_C_Rx4 YouTube does stabalazation which I said yes to. It almost eliminates the yaw jitter. Otherwise the jello is almost nonexistent in the orig video. I might post a side-by-side when I get home...

While installing my V3 mount one of the pins on the IMU cable broke. Does anyone know what type of connectors this IMU cable is and where I might be able to get it before Monday? This is really frustrating. I've been working on this and that for the better part of a month with the goal of...

Re: New Plug-N-Play 3DPower Gimbal (aka Taco Supreme) Based on their instructions like this: http://www.taco-rc.com/3DPBGP2VV3.html

Look at the light at the botton of the controller. When you click calibrate it will start to flash. When its done it will go solid. Check out the 6 point calibration youtube video in OP. I'm afraid the green check mark referenced earlier was a misnomer. Possibly related to imu calibration in...

viewtopic.php?f=7&t=10237 Enjoy!

Your controller needs to sleep with the fish as well. Otherwise the P2v+ is doomed. Build a bon fire, pour one out for the homies and launch it into the ocean.

I dont think your going to succeed in this endeavor. You need to get a real gimbal. I recommend goodluckbuy. It appears to be the most fun.

Define safe. Ive only drawn blood once and it was my own. Iv'e def had a change in mentality from the begining. It's less like a toy now. No blood in a couple weeks now.