Recent content by Seedler

I had all the same issues, and while trying to solve it got to know the gps module very well. Its not a battery issue cos it is only designed to hold charge for a short time. I tried replacing antennas with no improvement. In the end I discovered it was the LNA chip between the antenna and...

That's great thanks

Hi, Yes I'm getting lines. I have a single auxiliary power lead coming from inside the phantom shell with a connector splitting it to the transmitter and gimbal on the outside. For neatness sake I wanted to put the filter in the phantom shell and still just have the single auxiliary lead...

Hi, Just a quick question about lc power filters. I was going to make one to filter power to my video tx, and gimbal. My question is would the gimbal motors cause interference back into the transmitter? Should I just put an lc on my transmitter line, or would gimbal line need one too? I...

Hi, Got it sorted. I removed everything, then installed (2.4G Bluetooth DataLink Assistant Driver Installer) and (2.4G Bluetooth DataLink Assistant Installer v1.0.0.6) from dji website. I then installed everything on the CD except for the usb drivers. And hey presto it all works now. Weird

Hi, I just purchased a 2.4 datalink with pc ground station software. Everything installs except for the usb driver to communicate between laptop and ground end. I am out of ideas. I am trying to install it onto a windows 7 64bit laptop. Has anyone experienced this and found a solution? Is...

Hi, Found this battery http://www.rangevideo.com/rv-endurance- ... -pack.html Has anyone any experience using one of these or similar in there quad? I reckon it would fit into phantom 1.5 with a bit of working. I know its a low C, but if my thinking is rite with that capacity it should...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Cheers DeweyAXD that eases my mind a bit :)

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Managed to get 20 mins flight today with 2 x 4000 multistars. My rig is around 1400g. I reckon these two batteries will fit in the P2 shell with the rails cut out. I'm guessing I'd get well over half an hour with it stripped bare...

Hi, a few questions to ask of you folks. 1. I added a tarot 2D to my phantom. I do not have a gopro as of yet, but am using my fatshark pilot hd camera. I have it all properly balanced on the gimbal with a home made bracket. First problem I had was getting a tremor in the tilt motor. I...

So can this camera be used for Fpv and recording with the latest firmware? Would you just use gopro style leads to transmitter? And where can I get the latest of these cameras? Cheers. Damien.

I know, I would rather work something out myself too, or at least know how it broke. Damien.

Probably not. It was just a cheap 30w iron. Should probably invest in some decent tools. Ah well, live and learn :) Damien

Just another update folks. Think the module is totally fried now. Everything was working well until one day I was getting no satellites. I checked my other devices and they were getting zero satellites as well, so I thought it was interference of some sort. After a bit of testing I realised...

I believe it was the lna that was at fault from the word go. I have an app that tells me how many satellites are visible at different times of the day. I now see them all. So whether the lna is working or not, you cant get much better than that :) Damien.