Hi guys,
Hey, I'm trying to order some new motors for my phantom 2 and I have a choice between a 920kv and a 960kv motor.
The serial number is PH645379226.
I bought it about 4 months ago in Canada.
Thanks!
Mark
First, let me say thanks for the help. I'm over here in Thailand where there just isn't much support. I've emailed DJI and the store I bought it from, with no response from either.
You suggested I test the resistance of all the motor wires, which I've just done.
All the wires and combinations of...
I've just had a look at each motor with a magnifying glass and the motor coils all look good. There were no screws in the wrong places and none were too tight.
I also gave everything inside a once over and couldn't see anything amiss with wiring or solder joints.
So then I tried to start it up...
Hi and thanks for getting back to me.
For some reason I didn't think about unplugging the canbus cable.
The motors seem to turn freely.
When I first put the lid back on, I put it on wrong, but saw what I had done and put it on correctly before trying to start it.
So I put a Gopro mount on the underside of my Phantom 2.
At the same time I disconnected the two gimbal wires that come taped to the underside from where they connect on the inside and took them off.
I also took off the canbus, i disconnected the canbus and then threaded the cable up inside and...
Re: What type of connectors does DJI use for their batteries
Thanks for all the info guys! I've just bought a few more batteries and paid the big bucks for the DJI ones.
Cheers,
Mark
Hey, I'm a new owner of a Phantom 2 and I would like to use a Zippy 2800 battery as a spare. Anyone know what the type of connector is called that DJI uses?
Thanks!
Mark
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.