Recent content by roymoon

Launch half way up the mountain. You get 500 meters from the launch point. Or maybe if you wrap your drone in foil it won't be able to get GPS.

"And the Wi-Fi signal here defaults at 27 to begin with," I disagree with you. The maximum power allowed is 100mw or 20 db. 27 would be 500 mw. 30 is an insane 1 watt.

There's a youtube that shows no improvement with tri blades.

I don't see it as a compass problem. Just because you maintain a constant heading of 89 degrees doesn't mean you are flying due east. Most of my flights I fly straight for extended distances. Rarely can I aim for a distant building and have the bird fly straight there. I almost always have to...

I don't feel the lack of lightbridge is causing his problems. I have a standard and mine doesn't change to atti unless I hit the switch.

Immersive ?? I'm not so sure. You will have to take the 1280x720 and divide it in half, one for each eye.

So I guess you have to come up with a generic camera angle and stick with it.

The WiFi antennas inside your controller need to pointed at the bird. The external vertical antenna needs to be perpendicular to the bird. I would consider upgrading to the FCC mode.

P3S So I loaded up the above app to see what channels my system was using. I found the remote controller right away. But the bird was not shown. Another website said that the app would not show it if it didn't have a SSID broadcast. But I thought the app showed all signals (channels 1-14). So I...

Mine will do the max 1640 feet. But you can't be directly underneath it. Move it off a couple hundred feet.

Why bash DJI when it was totally your fault ? You should be on the ground by the time you get that low. I'm usually on the ground before I get the low battery warning never mind the critical warning.

Clear the old crud from the phone. or Reinstall the app.

I am urging people to think twice about turning things up to the full 27db. The output transistor (it may be inside an ic) was running at 100mw (FCC). But now you are putting 500mw through it. If it doesn't have the proper heat sink you could fry it. Why would the factory use any heat sink at...

Will it work for us in the US (FCC)?

It looks sweet but their website isn't even fleshed out yet. Do you want to be the first to try it ??