Recent content by Roseto75

  1. R

    phantom connection broken

    It's all about the cables. You can try replacig the cables inside the extender.
  2. R

    Fpvlr antennas problems.

    just turn it 2 times in the socket, also I reckon using contact cleaner spray will work well to dissolve the contaminants if any. I am getting ready for some FPVLR action too. Tony is shipping this back to me, ready for some tests of new antennas he's building for the inspire 1.
  3. R

    long flight over ocean chasing stuff with stage 3 antennas

    Re: long flight over ocean chasing stuff with stage 3 antenn seems like a nice flight, are you using washers on your cables for stage 3? my understanding is that washers should be removed to allow threads to stick out more on the plastic mounts which are pretty thick.
  4. R

    Telemetry OK but video dies after 300 meters...

    sounds like a dying wifi unit...
  5. R

    Fpvlr antennas problems.

    can you show how you are aiming the antennas? Also is your radio set to FCC mode? I see you are not in USA.... You should turn the screw in the controller to put into FCC mode
  6. R

    Fpvlr antennas problems.

    if the exposed threads on the sma connectors are too short you can remove the washer that is supplied, this allows the thread to be exposed more and allows the pins to mate. This is how I fixed a problem I had with a similar setup. Also sma connectors need to be secured with the nut tightly...
  7. R

    Feedback on suggestion

    there are 2 kinds of BP monitors, one that works with Immersionrc frequencies, the other that does not
  8. R

    My Phantom 2 FPV shopping list,,,

    Guys, from personal experienced Ibcrazy's antennas are no match to FPVLR or Circular Wireless antennas. Have tried all frequencies, 1.2GHz, 2.4Ghz and 5.8GHz, the FPVLR 5.8GHz are just fantastic! Blue beams gave me lines across the screen.
  9. R

    FPVLR Stage 2 Kit - Pilots Side

    there are other kits for drones using analog video or using lightbridge, you can email tony at [email protected]
  10. R

    Controller wire help

    it's quite simple the plug in the center goes to the center, the plug on the right goes on the right, the plug at the bottom goes at the bottom... actually one plug is power, just a black and red wire, that goes to the side of the board....
  11. R

    FPVLR stage 2 install questions

    I think I saw a facebook post by Tony saying the original antennas and shielding should be removed from under the board.
  12. R

    Stage 3

    Wow... 10k with 640x480 and 30fps or 15fps? gotta send fpvlr a message see if they want to sponsor my install a bit
  13. R

    FPVLR STAGE 3

    this does not need boosters. If you add boosters I believe it's called stage 4.
  14. R

    SMA vs. RP-SMA

    Hi, looking at the picture above, the ones called "plugs" are also called males. the ones called "jacks" are also called females (having an external thread) so sma male has a pin, rp-sma male has a hole in the center sma female has a hole, rp-sma female has a pin in the center. RP stands for...
  15. R

    Building a Long Range P2V + on a 500$ budget - Buildlog

    Just a quick update on the build: I was able to connect the Naza to the pc with a USB port, powering the naza with an external battery. All checked out fine, the latest version was automatically installed, I did set the limits to 7km horizontal range and 2km height just for fun, since I was in...